What did you do at your reloading bench today?

[Grunt67]

Ordered 4 lbs. IMR 4198 from Hogdon direct. today. Thanks to a heads up from Jake.

[Grunt67]

Got 100 pcs Starline brass, trimmed, lubed, sized, flared, & in the wet tumbler. Can't do anymore until my bullets are shipped, which have been on BO since Jan. 12.

Edit: Cleaned & set aside til bullets arrive.

[Shakey Jake]

I'm going to load some .223 Remington later today. I've got about 250 small rifle primers left. I'm going to load about 25 I think.
Jake

[Grunt67]

My bench has been cleared till further notice ( no bullets). Did make the rounds of my online suppliers today. "Out of stock", the standard result. The only bullets available were the Hornady Flex tip stuff & the dangerous game type. Not a lot of T-Rex sightings here.

[NHshtr]

Well I finally scored a brick of Federal small pistol primers. The LGS had 60 boxes and posted on the Facebook page this morning. Paid through the nose vs. pre-COVID, $89.99, (OK, $90)! Also picked up a bottle of WST which I use for 45 ACP at a more reasonable $25.
Popular rifle powder is still scarce around here. That's getting to be my pinch-point now.

[RanchRoper]

Was in my LGS in Lethbridge and they are well stocked. Lots of ammo and shelves of primers. Pistol and rifle. Cleaned him out of lead balls and T7 powder.

[Vaquero]

Was in my LGS in Lethbridge and they are well stocked. Lots of ammo and shelves of primers. Pistol and rifle. Cleaned him out of lead balls and T7 powder.

Out of curiosity, what were they asking for the primers?

RP

[RanchRoper]

I did not look but everything seemed to be just regular price.

[Oldbrass]

Loaded up a hundred 147 gr FMJ for my brothers .308 AR-10 rifle.

[Rifletom]

100 more .45 acp rounds with 230gr RN plated/5.4gr Universal to run thru the Pietta, along with some .45 Colt rounds. Desert trip coming soon.

[Vaquero]

Deprimmed 15 pcs of 41 mag, and 12 pcs of 44 mag brass that I shot off the deck yesterday.
And then 200+ pcs of 45 colt brass also.

RP

[Grunt67]

Nothing at the bench, per se, but did luck upon 100 Hornady 300gr. JHP bullets I have had on BO since Jan 12. These were at Midway,
limit (2), which is what I needed to fill my brass. The BO is on Midsouth Shooters. I'll leave it there, maybe they'll show up some of these days.
Pays to be persistent & keep looking everyday. Stock is scarce & this is a FCFS business, snooze & loose.

[Shakey Jake]

Loaded up 60 rounds of 69gr Sierra HPBT .223 rounds this afternoon.
Jake

[ol'pole]

Loaded 40 rounds of 45 colt, 20 pf 250 lrnfp over 10.6g of HS-6 and 20 with 11g of HS-6

[JVogler]

One round 9mm tcfp. Redding 9mm crimp die came via Amazon to compliment my Lee 3 die set for my Lee 4 hole turret press.

[Grunt67]

That's some good looking stuff, Jake.

[Hatchdog]

Loaded up 60 rounds of 69gr Sierra HPBT .223 rounds this afternoon.
Jake

Hi Jake,

What do you shoot those 69 SMK’s in and what powder do you use?

[JEBar]

put together 150 derringer 38's .... mostly cast wad cutters that I'm trying to get rid of

[Shakey Jake]

Loaded up 60 rounds of 69gr Sierra HPBT .223 rounds this afternoon.
Jake

Hi Jake,

What do you shoot those 69 SMK’s in and what powder do you use?

I'm using 23.0 gr of Norma 201 powder, CCI BR primer, and Norma brass (from factory loads). I shoot them through my Ruger American All Weather with a Burris 9 powered scope. It's a very accurate rifle for a the price point.
Jake

[runnin n gunnin]

Loaded up 60 rounds of 69gr Sierra HPBT .223 rounds this afternoon.

Jake, what platform are you shooting and what is the barrel twist.