The load was 8.2 grns of cfep coal 1.6
I also tried out my new Lee bullet dropper system, and boy, howdy is that slick. It worked beautifully. Now, I need only place brass in the shell holder, work the lever, and turn the turret.
Since I deprime and prime off press, my stations are as follows:
Redding Sizing di3
Redding Case mouth flare
Lee powder through die using harrel schutzen powder drop
Lee Bullet drop
Hornaday cowboy Bullet seater
Lee factory Crimp die
It's a mish-mash of bullets in my bullet feeder. I've working loads for all of them at 8.2 grns cfep and either 1.58 or 1.60 coal. I wanted some plinkers.
I also set up my second Lyman T-8 turret press yesterday and moved my 357 magnum dies over to it. I plan on loading a few hundred 158-grain subs using 5.2 grains of Win 244.
For some reason, though, my crimp die was giving me fits. I cleaned it twice, but it was still crushing brass. I've an order in for a collet-style crimp die.
I am also thinking of picking up a second Schutzen powder dropper.
I weighed out every third case yesterday. It was not off once. That's 40 cases of win 244 and 130+ of cfep.