Henry Rifle Forums

As most of you know, I love Old Model Ruger single actions. I'm always on the prowl for another OM when in gun shops or at gun shows.

I've recently been looking for an OM Blackhawk in 357 to shoot and carry, reason being that the OM Blackhawk 357 were built on the medium frame, not the large frame which Ruger used when switching to the New Model Blackhawk 357s. All the better to find one of these with a 4 5/8" barrel, but that length has always been the most desirable and all the harder to find.

Got lucky over the weekend, though, and found the perfect 4 5/8" OId Model 357 to carry and shoot with this one.




Problem is, it's too perfect. It hasn't even been fired. In fact, the seller claims he never even cocked the gun for fear of getting a turn line on the cylinder. By far, this is the finest condition of any OM Ruger single action I have ever encountered. It's like walking back in time to 1971 and buying a Ruger Blackhawk 357. In this condition, firing even one shot causes a significant drop in value.


Guess I better keep hunting for a used OM 357 Blackhawk to carry and shoot or the temptation to shoot this one will just be too much. Even have the handmade custom holster for it.


The search continues.

NCG that is one gorgeous Blackhawk. It looks like it just left the factory. I believe the original owner, when he says he never cocked the hammer. That is as pristine as the come. As much as i don't believe in owning a firearm and not shooting it, I do believe I would carefully wrap that up and put it away. Only bring it out on special occasions, and make sure everyone is wearing white cotton gloves.

Congratulations on a wonderful find.

Paul

Nice find NCG. I have one that was given to me that was made around 1981 and its in the same barrel length. I havent shot it much as I prefer to shoot my newer 5.5 inch convertible.

Thanks, guys.

For the time being, this one will sit in the safe, unfired. It's just so rare to find an Old Model in such gorgeous condition. I just have to be patient and find a shooter grade OM 357, now.

That’s quite the find. It would be oh so tempting to put some rounds downrange, but alas, it will probably be a safe queen.

Plus having the original box in such nice condition says to me make an exception this time and put it away. Congrats on a rare find.

As mentioned, I'm now on the hunt for another Old Model 357 or even a New Model flattop or possibly a New Vaquero, because these also use the earlier medium frame. Better yet, a convertible with an extra 9mm cylinder, because 9mm is as cheap to shoot as it gets.

Oh, I do have a Taylor's Uberti/Colt 357, but it has that darn 3 click hammer safety set up which I have grown not to trust or like. Besides, nothing beats a Ruger for durability.

Id love to have an old 3 screw unconverted 357 or 41 but Im not payin what there askin for them

I financed this one mostly by selling off some of my little used Contender stuff at the same gun show. Looking at it from an investment point of view, both Contenders and OM Rugers are appreciating in value, but the long term outlook makes the OM Rugers the better risk. Lots more Ruger fans out there than Contender fans.

North Country Gal wrote: ↑

Sat Jun 01, 2024 12:14 pm

As mentioned, I'm now on the hunt for another Old Model 357 or even a New Model flattop or possibly a New Vaquero, because these also use the earlier medium frame. Better yet, a convertible with an extra 9mm cylinder, because 9mm is as cheap to shoot as it gets.

Oh, I do have a Taylor's Uberti/Colt 357, but it has that darn 3 click hammer safety set up which I have grown not to trust or like. Besides, nothing beats a Ruger for durability.

Nice find on the old model 357, I've had a couple of the 357/9mm convertibles.
The 6.5" one was stolen 30+ years ago and the 4 5/8" one I foolishly traded away 7 years ago.
I did find a nice slightly used New model Vaquero last summer with the 4 5/8" barrel, but it's not a convertible.

RP

Thanks

My favorite convertible has always been the 45 Colt/45 ACP because both use the same bore size, giving great accuracy with both cartridges. I really like shooting the 45 ACP in single action revolvers.

North Country Gal wrote: ↑

Sun Jun 02, 2024 11:35 am

Thanks

My favorite convertible has always been the 45 Colt/45 ACP because both use the same bore size, giving great accuracy with both cartridges. I really like shooting the 45 ACP in single action revolvers.

I do still have one of those with the 4 5/8" barrel, and the acp cylinder works just as well in my 45 Vaquero.

RP

That is a mint of an old Ruger you have NCG and yes a tough call to shoot it I assume you haven't cocked the hammer and it should be the old 4 click action. See if you can locate a Cimarron OM .357 revolver as Uberti was still making them with the 4 click no safety hammer. Few years ago I got one thru Evil Roy's store and his is the same revolver but he does an action job on them. I got it before the prices went to the moon and it is a nice shooter.

If not take a look on Guns International as you can find some hard to locate guns there and where I found my older Ruger Vaquero 44 Bisley.

You have more will power than I do Joanie. I would have shot it by now.

While I didnt mention whether I would shoot it or not I agree with Gene. I would have shot it by now. None of us can tell you what to do but I would think so am I going to leave this behind for someone else to shoot. Because you know eventually its gonna probably get shot unless you have some real collector following you to leave it to. So why be the first one to shoot it. Just my .02 worth

Yeah, I'm not ruling anything out at this point. Yes, it is an un-converted Old Model. We cocked the hammer back just far enough to make sure there was no transfer bar. And I have cocked it a couple of times to check the trigger, which, like most Old Models, is very good. Right now, the gun is sitting in the safe, out of sight, to reduce temptation.

I admire your willpower and your sense of value and respect for a rare specimen. If it was mine and I knew that I was going to pass it down to someone who might pass it down to either preserve it as is. Or be able to turn it for a nice price. I might not shoot it now but since I am pretty sure that I would pass it down to my youngest grandson who would want to shoot with me while I am still around. I most likely would have already been to the range. I definitely am lacking in the willpower department.

North Country Gal wrote: ↑

Mon Jun 03, 2024 10:37 am

Yeah, I'm not ruling anything out at this point... Right now, the gun is sitting in the safe, out of sight, to reduce temptation.

It's thought that eventually the Earth will fall into the Sun, and the Sun will fall into the center of the Milky Way (a Black Hole knowns as Sagitarious A*), and the rest of the Galaxies in the universe will all eventually collapse back into the initial Singularity (Big Bang). Or so it seems now as we continue to figure it all out.

In the end, though, regardless of some theoretical universal plan, your beautiful, pristine revolver has no real lasting value except to you in that moment that you take a deep breath and you pull back the hammer, take careful aim, and squeeze the trigger.

Shoot it and enjoy that moment.

North Country Gal wrote: ↑

Thu May 30, 2024 6:18 pm

Thanks, guys.

For the time being, this one will sit in the safe, unfired. It's just so rare to find an Old Model in such gorgeous condition. I just have to be patient and find a shooter grade OM 357, now.

I have to say that I'd probably done the same, considering the cylinder has never turned. That is a rare and nice find. I hope you find another in not so nice condition.

I recently ran across a Ruger that I'm not sure was ever fired. Yes, I plan to shoot it anyway. It had no box or papers.

Congrats on that beautiful Ruger.

Thanks, again, guys. For now, I'll just pull it out and admire it for the fine old Ruger it is.