Site seems to be working OK.

The 1911 Slippery Slope

User avatar
clovishound
Drover
Posts: 2512
Joined: Wed Apr 13, 2016 4:18 pm
Location: Summerville SC
United States of America

Re: The 1911 Slippery Slope

Post by clovishound » Wed Dec 20, 2017 12:03 pm

As I understand it, there were two reasons the FBI dropped the .40. The other reason was reliability issues with the .40. A lot of .40s are built on 9mm frames and can't stand up to the pounding they get in the larger caliber.
There is, I think, humor here which does not translate well from English to sanity. - Sanya

ditto1958
Cowboy
Posts: 1672
Joined: Sun Mar 20, 2016 11:46 pm
Location: Northeastern Wisconsin
United States of America

Re: The 1911 Slippery Slope

Post by ditto1958 » Wed Dec 20, 2017 9:05 pm

North Country Gal wrote:Hey, let's not forget the 10mm, the one that started it all for the .40. Glad to see the 10mm coming back into popularity. Have shot it in a 1911 and a Sig and it really is an outstanding round.
Too bad Henry doesn’t have a 10mm Big Boy.

tx gunrunner

Re: The 1911 Slippery Slope

Post by tx gunrunner » Wed Dec 20, 2017 11:01 pm

North Country Gal wrote:Hey, let's not forget the 10mm, the one that started it all for the .40. Glad to see the 10mm coming back into popularity. Have shot it in a 1911 and a Sig and it really is an outstanding round.
The Glock in 45 acp or 10mm is a super guns , but in a DA double stack the trigger is too far forward for my hands . Glock in the small frame double stack fits my hand perfect and Glock was the only double stack in any gun at that time to fit my hand . After the problem I had in Az with more bad guys then ammo . I switched from 1911 to Glock in 40 SW double stack . The 1911 with short trigger fits me perfect but 8 round is not ammo in my gun for me .. When the bad guy are only 3 steps away from you , you will never get a chance to reload your gun again . That is why I will never carry a revolver unless I use it as a BUG gun only . I got lucky in PA with a model 60 SW one shot and they all turned and ran .

Bugs

Re: The 1911 Slippery Slope

Post by Bugs » Sat Dec 23, 2017 7:48 am

Image

User avatar
North Country Gal
Firearms Advisor
Posts: 6823
Joined: Thu Apr 07, 2016 12:46 pm
Location: northern Wisconsin
United States of America

Re: The 1911 Slippery Slope

Post by North Country Gal » Sat Dec 23, 2017 11:27 am

TX, if the gun doesn't fit, doesn't matter about the rest of the details. I agree.

LOVE that Baer!

tx gunrunner

Re: The 1911 Slippery Slope

Post by tx gunrunner » Sat Dec 23, 2017 4:45 pm

Nice looking gun ..........I'm surprised Baer don't have a guild rod on recoil spring .
You do not have the required permissions to view the files attached to this post.

CentFlHenry41

Re: The 1911 Slippery Slope

Post by CentFlHenry41 » Fri Jan 19, 2018 8:46 pm

Rock Island ultra FS 10mm
You do not have the required permissions to view the files attached to this post.

ditto1958
Cowboy
Posts: 1672
Joined: Sun Mar 20, 2016 11:46 pm
Location: Northeastern Wisconsin
United States of America

Re: The 1911 Slippery Slope

Post by ditto1958 » Fri Jan 19, 2018 10:26 pm

Well, it'll be February soon, and I haven't bought any more 1911's. Still, there's a lot of 2018 left yet.

Mistered

Re: The 1911 Slippery Slope

Post by Mistered » Sat Jan 20, 2018 11:27 am

I have 'dabbled' with 1911s over the years but currently only own one - a 1991-A1 I bought new in 2003 and is the most reliable and accurate of all I have owned. I attribute my somewhat early, bad experiences were due to me being 'bent' on owning only Colt and some of them have been older with some of the not too untypical problems they suffered from. One of the worst was an early 70's Gold Cup I bought that appeared unfired. Beautiful fit and finish but a terrible shooter! FTEs, jamming and a myriad of other issues caused me to sell it off. My 1991 is the 'plain Jane' early parkerized model, nothing to look at but it is capable of 1.5" groups at 25 yards with good reloads and benchrested. Even new shooters routinely shoot ragged groups with it and are impressed with its accuracy. Most of my early experiences were due to inexperience but my gun interests drifted into other areas so for me the 1911 is just one of the guns I own but shoot regularly. For me it's a lot about tradition and the quality of an all steel gun. The 1911 however is still the benchmark by which nearly all SA pistols are 'gauged' and even though a single stack style I believe it to still be a formidable gun for defense considering the ease of control and accuracy modern ones display. If shot placement is the key then a good 1911 in the right hand will deliver.

Colt46
Tenderfoot
Posts: 14
Joined: Mon Apr 09, 2018 5:39 pm
Location: Michigan, Upper Peninsular
United States of America

Re: The 1911 Slippery Slope

Post by Colt46 » Wed Apr 18, 2018 11:42 pm

I have more 1911's, Ruger, Springfield, Colt. Mostly 45acp but a couple of 9mm. If I going to a gun store I am going to head to the 45 acp case and look and handle a couple 1911's .
Life is short, Live life, shoot more. :lol:
S&W 686 4 Inch, S&W 686 3 inch, 686 S&W 2.5 Inch, S&W m 29-2 4 inch, Springfield Armory XD 9, 1911, Loaded, Mil-Spec, Compact 1911,Ranger Officer 9 mm, Colt 1911 Comp,

User avatar
ESquared
Deputy Administrator
Posts: 2911
Joined: Fri Dec 30, 2016 9:00 pm
Location: KC Area
United States of America

Re: The 1911 Slippery Slope

Post by ESquared » Wed Jun 27, 2018 12:07 pm

Glad I found this thread. After being raised in the pistol world on Sig-Sauers, with their de-cocker, no safeties, DA/SA manual of arms, I resisted 1911s forever. Had myself convinced I'd never master the thumb safety in a high stress situation (I carry quite a bit). Then a lifelong friend of mine (the same one who turned my onto Henrys) started crowing about his Springfield 1911.
Initially took the plunge with a Sig 1911 Nightmare Carry, then really jumped in the deep end with a good deal on an Ed Brown Special Forces Carry. Sold the Sig (and a bunch of other Sigs, for that matter) and now have a Dan Wesson V-Bob (9mm) to go along with the EB. It's truly an addictive gun category to dabble in. So much customization, so much great gun-building going on in this segment.
You do not have the required permissions to view the files attached to this post.
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357

Henry88

Re: The 1911 Slippery Slope

Post by Henry88 » Wed Jun 27, 2018 1:04 pm

Hey Esquared, that is just about perfection right there, and love that they're 9mm.
I don't think Georg Luger, who was Austrian could have dreamed that 100 years later his cartridge would still be the top of the town.

From Wikipedia,
"In 2013 a chart of popular calibers that was released by the website Luckygunner.com showed 9mm x 19mm Parabellum as having 21.4% of the entire cartridge market followed by the .223 Rem at 10.2% (with 5.56mm included this is 15.7%). The next most popular caliber was .45ACP.[19]"

https://en.wikipedia.org/wiki/9%C3%9719mm_Parabellum

User avatar
North Country Gal
Firearms Advisor
Posts: 6823
Joined: Thu Apr 07, 2016 12:46 pm
Location: northern Wisconsin
United States of America

Re: The 1911 Slippery Slope

Post by North Country Gal » Wed Jun 27, 2018 1:42 pm

Those two are as good as it gets in their respective 1911 categories. Truly beautiful examples of 1911 art. Thanks for sharing.

User avatar
ESquared
Deputy Administrator
Posts: 2911
Joined: Fri Dec 30, 2016 9:00 pm
Location: KC Area
United States of America

Re: The 1911 Slippery Slope

Post by ESquared » Wed Jun 27, 2018 3:21 pm

Thank you both. The EB SF Carry (with the "Longmire" grips) is actually a .45, but it's so smooth that you'd never guess it. And the V-Bob is a dream as well. As much as I could have been sucked into the 1911 undertow, I'm happy enough with those two for quite a while, I think. I mean, where does one go from there? Hard to go "up" the food-chain (and debateable) without spending thousands, and I believe the Ed Brown is about at the peak of the diminishing returns curve when it comes to what you can spend on a 1911 for what you get.
Besides, now that the 1911 itch has been scratched, I can focus on the Henry world for a while!
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357

Post Reply