Page 1 of 1
Slippery butt
Posted: Thu Nov 01, 2018 8:05 pm
by bandit1250
This is not about what it sounds like.

I went in the woods today with my CZ Lux 22 for squirrel. Every time I was getting comfortable for a shot and using my shooting sticks the butt with that lousy plastic butt plate would start to slid on my shoulder. I thought about cutting the stock and putting a thin Pachmayr rifle pad on but I don't plan on hunting squirrel enough this season to do that right now. My fix may be considered a band-aid for the cure but it works and I can live with it for now. I got a piece of the no skid material that sticks on steps and cut a piece to fit the butt plate and put that on it. No slipping now. Doesn't look to bad for a 3 minute fix.

Re: Slippery butt
Posted: Thu Nov 01, 2018 8:19 pm
by JEBar
a country boy at heart will survive .... nice fix, very innovative
Re: Slippery butt
Posted: Thu Nov 01, 2018 8:24 pm
by krunchnik
Works real well on pistol grips also.
Re: Slippery butt
Posted: Thu Nov 01, 2018 11:13 pm
by Mags
.
Krunchnik, your first post. Welcome to the forum from the TV Oregon!
krunchnik wrote:Works real well on pistol grips also.
Re: Slippery butt
Posted: Thu Nov 01, 2018 11:20 pm
by Mistered
Huh, Huh, - he said 'slippery butt' !
Re: Slippery butt
Posted: Fri Nov 02, 2018 12:14 am
by Ojaileveraction
I would definitely do that!
Re: Slippery butt
Posted: Fri Nov 02, 2018 1:56 am
by Mags
I don't think it would look good on my brass butt.
Re: Slippery butt
Posted: Fri Nov 02, 2018 7:52 am
by CT_Shooter
Bandit1250 wrote:I got a piece of the no skid material that sticks on steps and cut a piece to fit the butt plate and put that on it. No slipping now.
Thanks for the tip, Bandit.
krunchnik wrote:Works real well on pistol grips also.
And welcome to the forum, Krunchnik.
Re: Slippery butt
Posted: Fri Nov 02, 2018 8:50 am
by BigAl52
Good Idea bandit. But how does that 444 work on squirrels
Re: Slippery butt
Posted: Fri Nov 02, 2018 9:36 am
by tx gunrunner
I've used the 3M stair non-skid tape on my air rifles , 22's and most target guns . It works great

Re: Slippery butt
Posted: Fri Nov 02, 2018 10:54 am
by bandit1250
BigAl52 wrote:Good Idea bandit. But how does that 444 work on squirrels
Not sure how the 444 Marlin would work on squirrels but I think I may be slightly under gunned.

We have big tough fox squirrels here so I use it mostly on real aggressive chipmunks and use the 300 gr. bullets.

Re: Slippery butt
Posted: Fri Nov 02, 2018 12:54 pm
by Mags
.444 is pretty big caliber for squirrels and chipmunks.
Have eastern gray and fox here. .410 #4 shot works nicely. I leave the chipmunks to the cats.
bandit1250 wrote:BigAl52 wrote:Good Idea bandit. But how does that 444 work on squirrels
Not sure how the 444 Marlin would work on squirrels but I think I may be slightly under gunned.

We have big tough fox squirrels here so I use it mostly on real aggressive chipmunks and use the 300 gr. bullets.

Re: Slippery butt
Posted: Sun Nov 04, 2018 4:37 pm
by tx gunrunner
The 32-20 will do squirrels to deer . Low noise and recoil and super accurate round . If you reload make it a better round . The 327 mag come very near the same round . The 32-20 bottleneck feed better in lever gun then the 327 mag straight wall case .