Guess who just had a birthday? We did. Henry Rifle Forums has made it to the 10 year mark. Thank you to all members, I'm glad you are here!
Uberti 1860 problem
- CT_Shooter
- Administrator emeritus
- Posts: 5645
- Joined: Mon Mar 21, 2016 8:42 am
- Location: Connecticut

Re: Uberti 1860 problem
What if anything have you tried?
Here are some wild and crazy ideas... none from a gunsmith or even from someone who is mechanically inclined.
You said it has lateral movement, but not vertical; can you get a pair of needle nose pliers around it at either end to grab it and pull? Is it possible to get a strand of dental floss or wire under and up the other side to pull on it, maybe using a curved sewing needle? You might also consider crushing the center of the brass case with a screwdriver and hammer to make the cartridge shorter and possibly free it up (don't think it would ignite the powder), you might even use a small chisel to chip off a bit of the lead bullet to make it shorter.
Just trying to help. It is an unusual situation. Good luck.
Here are some wild and crazy ideas... none from a gunsmith or even from someone who is mechanically inclined.
You said it has lateral movement, but not vertical; can you get a pair of needle nose pliers around it at either end to grab it and pull? Is it possible to get a strand of dental floss or wire under and up the other side to pull on it, maybe using a curved sewing needle? You might also consider crushing the center of the brass case with a screwdriver and hammer to make the cartridge shorter and possibly free it up (don't think it would ignite the powder), you might even use a small chisel to chip off a bit of the lead bullet to make it shorter.
Just trying to help. It is an unusual situation. Good luck.
H006M Big Boy Brass .357 - H001 Classic .22LR - Uberti / Taylors & Co. SmokeWagon .357 5.5" - Uberti / Taylors & Co. RanchHand .22LR 5.5"
Re: Uberti 1860 problem
45 lc
"when you have to shoot, shoot, don't talk" 
Igitur quÄ« dÄsÄ«derat pÄcem, prƦparet bellum
Igitur quÄ« dÄsÄ«derat pÄcem, prƦparet bellum
Re: Uberti 1860 problem
CT_Shooter you had a winner, I used a length of fishing micro filament wiggled it around the shell, pulled up on it and on lever at same time and it moved a little. Did that 5 or 6 times and lifter released and lifter and bullet dropped all the way to the tube and I tilted the bullet all the way out 
Thanks for the help, this forum is the best.
Thanks for the help, this forum is the best.
"when you have to shoot, shoot, don't talk" 
Igitur quÄ« dÄsÄ«derat pÄcem, prƦparet bellum
Igitur quÄ« dÄsÄ«derat pÄcem, prƦparet bellum
- CT_Shooter
- Administrator emeritus
- Posts: 5645
- Joined: Mon Mar 21, 2016 8:42 am
- Location: Connecticut

Re: Uberti 1860 problem
Awesome!!!
brm4450 wrote: āWed Jun 03, 2020 5:31 pmCT_Shooter you had a winner, I used a length of fishing micro filament wiggled it around the shell, pulled up on it and on lever at same time and it moved a little. Did that 5 or 6 times and lifter released and lifter and bullet dropped all the way to the tube and I tilted the bullet all the way out
Thanks for the help, this forum is the best.
H006M Big Boy Brass .357 - H001 Classic .22LR - Uberti / Taylors & Co. SmokeWagon .357 5.5" - Uberti / Taylors & Co. RanchHand .22LR 5.5"
- RanchRoper
- Forum Ambassador
- Posts: 12943
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta

Re: Uberti 1860 problem
Oh sure, that was going to my next suggestion....
Glad it worked out!
Glad it worked out!
Pedersoli Frontier Flintlock .50
OhkĆnohkomit - Shoot skillfully
- Vaquero
- Ranch Boss
- Posts: 12038
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville

Re: Uberti 1860 problem
Good job CT, and glad it worked out brm.
RP
RP
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Re: Uberti 1860 problem
great glad it worked out. Good suggestion CT. Those pics helped alot.
Don't let the old man in
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
Re: Uberti 1860 problem
Off to the range tomorrow, as John Wayne said āGod willing and the creek donāt riseā
"when you have to shoot, shoot, don't talk" 
Igitur quÄ« dÄsÄ«derat pÄcem, prƦparet bellum
Igitur quÄ« dÄsÄ«derat pÄcem, prƦparet bellum
- JEBar
- Town Marshal / Deputy Admin
- Posts: 20306
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC

Re: Uberti 1860 problem
looking forward to your report
Re: Uberti 1860 problem
Uberti and I showed up at the range had a half of box of old BH .45 Colt 250 GR. RNFP shells, thought Iād use em up.
50 yds
You do not have the required permissions to view the files attached to this post.
"when you have to shoot, shoot, don't talk" 
Igitur quÄ« dÄsÄ«derat pÄcem, prƦparet bellum
Igitur quÄ« dÄsÄ«derat pÄcem, prƦparet bellum