Spring has sprung. Get out and shoot your Henry
I have the Henry H0006MR Lever .357 Question
I have the Henry H0006MR Lever .357 Question
Hi,
I have the Henry H0006MR Lever .357 and it is impossible to release (Twist) the Mag tube in order to reload it.When I remove the rubber "0" Ring it releases and locks fine but of course its loose,with the "O" ring re installed I need a pair of pliers to twist it back to lock and "unlock" it
Am I the only one?
Thanks in advance
jpy15026
I have the Henry H0006MR Lever .357 and it is impossible to release (Twist) the Mag tube in order to reload it.When I remove the rubber "0" Ring it releases and locks fine but of course its loose,with the "O" ring re installed I need a pair of pliers to twist it back to lock and "unlock" it
Am I the only one?
Thanks in advance
jpy15026
0 x
Re: I have the Henry H0006MR Lever .357 Question
On mine I took the magazine tube out of all 3 rifles-ran a clean bore mop down the inside and then cleaned the outside tube with a oiled cloth.All mine are not difficult to turn or remove.
0 x
THE CROW
Re: I have the Henry H0006MR Lever .357 Question
.
Your are not alone. Some have had problems with the o-ring making the mag tube closure/opening too tight fitting.
Other members have
o gone to the local hardware store with their mag tube to find a better fitting thinner o-ring.
o called/emailed Henry Customer support about the tight fit and been sent o-rings http://henryrifleforums.com/viewtopic.php?f=5&t=5127
o left it as is.
Your are not alone. Some have had problems with the o-ring making the mag tube closure/opening too tight fitting.
Other members have
o gone to the local hardware store with their mag tube to find a better fitting thinner o-ring.
o called/emailed Henry Customer support about the tight fit and been sent o-rings http://henryrifleforums.com/viewtopic.php?f=5&t=5127
o left it as is.
jpy15026 wrote:Hi,
I have the Henry H0006MR Lever .357 and it is impossible to release (Twist) the Mag tube in order to reload it.When I remove the rubber "0" Ring it releases and locks fine but of course its loose,with the "O" ring re installed I need a pair of pliers to twist it back to lock and "unlock" it
Am I the only one?
Thanks in advance
jpy15026
Last edited by Mags on Sun Apr 14, 2019 8:08 pm, edited 1 time in total.
0 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234
Re: I have the Henry H0006MR Lever .357 Question
All of the above are great places to start, but if you haven't ever cleaned out the mag tube, start there. They are notoriously dirty coming out of the box, and that could be the issue.
Otherwise, Mags is right on, except for "leave it as is," which seems not exactly workable for you!
Otherwise, Mags is right on, except for "leave it as is," which seems not exactly workable for you!
0 x
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357
Re: I have the Henry H0006MR Lever .357 Question
I had to send mine back. Henry insisted. Took about month to get it back.
0 x
Vietnam, Cambodia, DMZ
101st Airborne, Recon. ( Where in the heck are we?)
25th Inf. Div.2/22 Inf. Reg.(mech.)
Sgt., U.S. Army, Sniper
S&W Model 67
Uberti 1851 Navy Conv.
Uberti 1873 Bisley
Henry .357 Carbine CCH
Henry SGR .22
Taurus 856
101st Airborne, Recon. ( Where in the heck are we?)
25th Inf. Div.2/22 Inf. Reg.(mech.)
Sgt., U.S. Army, Sniper
S&W Model 67
Uberti 1851 Navy Conv.
Uberti 1873 Bisley
Henry .357 Carbine CCH
Henry SGR .22
Taurus 856
Re: I have the Henry H0006MR Lever .357 Question
I went another route with my 44Mag. It was tight also and I went around the O-ring with a fine tooth file and removed just enough io make it work easer. My son now has it and it has worked out well.
Jim
Jim
0 x
Henry BBB 44mag
Henry 1860
Henry 45/70 Brass
Henry 1860
Henry 45/70 Brass
Re: I have the Henry H0006MR Lever .357 Question
I had the same issue with the 45.70—Henry sent me a new tube—didn’t work. I put metal bluing on the tube, and found it was the bottom of the tube binding inside the outer tube. Apparently the test fire distorted the outer tube.
0 x
- Rifletom
- Deputy Marshal
- Posts: 3904
- Joined: Tue Aug 21, 2018 11:26 pm
- Location: California Territory
Re: I have the Henry H0006MR Lever .357 Question
Same thing on my BB brass .357. I called Henry about it and they sent me a new tube. Received it in two days. Works perfect.
0 x
-
- Tenderfoot
- Posts: 3
- Joined: Sat Feb 22, 2020 12:00 pm
PUSH and Twist . . .
Not obvious by looking but one needs to push down from the top while twisting, especially when the magazine is under compression & full of bullets. I suspect it will loosen up some over time from use, but should still require pushing while twisting, again especially while under pressure.
0 x