Spring has sprung. Get out and shoot your Henry

Uberti Henry

User avatar
Vaquero
Ranch Boss
Posts: 10256
Joined: Mon Mar 21, 2016 12:56 am
Location: Somewhere between Memphis & Nashville
United States of America

Re: Uberti Henry

Post by Vaquero » Sun Mar 17, 2019 9:30 am

Nice read RR, thanks.
Now I want more than I did before. :lol:
Maybe this Summer.

RP
0 x
Monte Walsh "You have No idea how little I care". :lol:

Ain't No Apologies for My Temperament :shock:
Si vis pacem, para bellum
H001, H006, H012

User avatar
PT7
Drover
Posts: 4889
Joined: Mon Mar 21, 2016 8:32 am
Location: The Show-Me State
United States of America

Re: Uberti Henry

Post by PT7 » Sun Mar 17, 2019 10:31 am

dddrees wrote:
RanchRoper wrote:
dddrees wrote:Thanks for the link and it's a great read. I just happen to be searching and relooking all things Henry myself the last couple of days. I don't have one yet but should be getting my Henry reproduction in a few weeks. I went with the New Original Henry from Henry. So whether it's from Uberti or Henry Repeating Arms it's one of those firearms that are just plain gorgeous to look at and just truly fantastic to own and I can't wait to fire it.
You will enjoy it. I hope you get the same historical thrill when you shoot yours as I do with mine. Every time.
Thanks, and I hope so. It really is the one that reignited my interest in lever guns. I may have gotten my 1866 and 1873 first but I can't imagine getting those and not getting a 1860 Henry as well. I also think about getting a 1892 as well but we"ll see. Those first three really are the ones I've always wanted most.
Looking forward to photos of your soon-to-be rifle trio some day real soon. :)
PT7
1 x

~Пока~

dddrees
Cattle Driver
Posts: 703
Joined: Sun Jun 26, 2016 5:55 pm
United States of America

Re: Uberti Henry

Post by dddrees » Sun Mar 17, 2019 11:22 am

PT7 wrote:
dddrees wrote:
RanchRoper wrote:
You will enjoy it. I hope you get the same historical thrill when you shoot yours as I do with mine. Every time.
Thanks, and I hope so. It really is the one that reignited my interest in lever guns. I may have gotten my 1866 and 1873 first but I can't imagine getting those and not getting a 1860 Henry as well. I also think about getting a 1892 as well but we"ll see. Those first three really are the ones I've always wanted most.
Looking forward to photos of your soon-to-be rifle trio some day real soon. :)
PT7

Me too. LOL

But yeah, I've had the same thought about capturing all three together since I committed to the Henry.

Unfortunately I won't be able to put the three together for a good three to four months. As it turns out my 1866 has been back to the mothership for about a 5 weeks now and it will be another 3 to 4 more months before I get it back. When I picked it up at my FFL I noticed a bit of looseness in the forearm stock. I wrestled with what I should do for about a month and then woke out of that stupidity and decided to send it in for repair. The wood on that gun was gorgeous and I was really afraid I might get less good looking wood back. Thing is it just wasn't right and I needed to get it fixed.

I spoke with CS a few days ago and they said to replace the forearm which is what will be required will take three to four months. Wood curing and such. It's frustrating but the wait will be long forgotten after I get it back as long as they do a good job and match the butt stock they assured me that would take place.
1 x

User avatar
Mistered
Drover
Posts: 3372
Joined: Thu Jun 30, 2016 9:32 pm
Location: Wickiup Junction, OR
United States of America

Re: Uberti Henry

Post by Mistered » Sun Mar 17, 2019 1:36 pm

and they said to replace the forearm which is what will be required will take three to four months. Wood curing and such.
Wood curing & such? they should already have stocks (or at least blanks) prepared from previously cured wood.
This does not sound right.
1 x

dddrees
Cattle Driver
Posts: 703
Joined: Sun Jun 26, 2016 5:55 pm
United States of America

Re: Uberti Henry

Post by dddrees » Sun Mar 17, 2019 2:30 pm

Mistered wrote:
and they said to replace the forearm which is what will be required will take three to four months. Wood curing and such.
Wood curing & such? they should already have stocks (or at least blanks) prepared from previously cured wood.
This does not sound right.
When I initially spoke to CS before sending the gun in and they said they had some on hand and if they could match it it would be 4 to 5 weeks and double that time if they couldn’t. When I spoke to CS at 4 weeks I was again reassured that the initial assessment was the same and the CS person said they had plenty of wood on hand and a good chance it would be done soon. At 5 weeks I was told it would be 3 to 4 months. This time the CS person supposedly checked with the gunsmith and he looked at the forearm and said it would require replacement.

Not sure if the fact whether it’s the 2018 Shot Show Version with better grade of wood wether that’s an issue or not. Not sure why I’ve been told two different things. The rifle itself is a Miroku Winchester so it’s made in Japan and the rifle was sent to Winchester n St Louis for repair. Exactly what’s going on I can’t say for sure but then again initially I was not pleased that I was told something else and that is why the CS representive went down to speak to the gunsmith the last time.

The other option was to refuse delivery at the FFL. However that opportunity is done and past. However doing so could have been problematic given this is a limited version. As it turns out the seller has more but at the time I had no idea how many and whether all had been spoken for or not. Typically in these cases there are no guarantees and this is the version I wanted.

As stated previously I am currently frustrated but if they make it right then when I get it back this will be a non issue.
0 x

User avatar
RanchRoper
Forum Ambassador
Posts: 12681
Joined: Mon Mar 21, 2016 12:14 am
Location: Land of Shining Mountains, Alberta
Canada

Re: Uberti Henry

Post by RanchRoper » Sun Mar 17, 2019 2:32 pm

Hope it all works out ok, and your rifle is back soon. Best of luck.
0 x
1860 Colt SA Richards Conversion Revolver .45C
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50

Ohkínohkomit - Shoot skillfully

dddrees
Cattle Driver
Posts: 703
Joined: Sun Jun 26, 2016 5:55 pm
United States of America

Re: Uberti Henry

Post by dddrees » Sun Mar 17, 2019 2:37 pm

RanchRoper wrote:Hope it all works out ok, and your rifle is back soon. Best of luck.
Thanks, and sorry for sidetracking your thread.
0 x

User avatar
ESquared
Deputy Administrator
Posts: 2911
Joined: Fri Dec 30, 2016 9:00 pm
Location: KC Area
United States of America

Re: Uberti Henry

Post by ESquared » Sun Mar 17, 2019 3:08 pm

RR, I think I found it on GB. Only one listed, although there may be others out there "in the wild." Interesting to read the listing - unless you're plugged into how it all works (which, I guess, anyone who would be looking at this should be), you'd never know that Uberti makes this rifle.

https://www.gunbroker.com/item/798894636
1 x
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357

dddrees
Cattle Driver
Posts: 703
Joined: Sun Jun 26, 2016 5:55 pm
United States of America

Re: Uberti Henry

Post by dddrees » Sun Mar 17, 2019 3:14 pm

ESquared wrote:RR, I think I found it on GB. Only one listed, although there may be others out there "in the wild." Interesting to read the listing - unless you're plugged into how it all works (which, I guess, anyone who would be looking at this should be), you'd never know that Uberti makes this rifle.

https://www.gunbroker.com/item/798894636
It does say it’s from Cimaron and that’s pretty typical for a Uberti which is distributed through Taylors or Cimaron.
Last edited by dddrees on Sun Mar 17, 2019 3:24 pm, edited 1 time in total.
0 x

User avatar
ESquared
Deputy Administrator
Posts: 2911
Joined: Fri Dec 30, 2016 9:00 pm
Location: KC Area
United States of America

Re: Uberti Henry

Post by ESquared » Sun Mar 17, 2019 3:21 pm

dddrees wrote:
ESquared wrote:RR, I think I found it on GB. Only one listed, although there may be others out there "in the wild." Interesting to read the listing - unless you're plugged into how it all works (which, I guess, anyone who would be looking at this should be), you'd never know that Uberti makes this rifle.

https://www.gunbroker.com/item/798894636
I’ve seen better advertisements on GB but all of that additional verbiage takes time. In the long run not sure how much that work pays off for a vendor on GB. I think individuals reselling generallly do better. Generally I have a pretty good idea what I am looking for before conducting my GB searches.
All I was trying to do was find a live example of a NIB version of the rifle that this thread is about. Agreed some of the copywriting on GB leaves a lot to be desired. Makes you wonder how this particular guy got to be a "Top 10" seller, doesn't it? Not a lot of attention to detail.
0 x
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357

Post Reply