What a job. I replaced 11 O rings on my Benjamin PCP hand pump. I was airing up a rifle a few months ago and one of the seals blew out. I bought a kit that week and fast forward a couple of months and took the time to replace the seals.
What a job. It took almost two hours. I was careful to watch a video on Youtube and read the instructions with the kit.
Have you ever rebuilt one North Country Gal?
What a chore.
I pumped up the Discovery after that and it was fine. Glad I had the time now.
I should have taken pictures, but the inside was covered in dirty filthy silicone grease. I was covered too.
Spring has sprung. Get out and shoot your Henry
Replaced the O rings on the Benjamin PCP hand pump
- daytime dave
- Administrator / Owner
- Posts: 4830
- Joined: Sun Mar 20, 2016 10:27 pm
- Location: Upstate NY
Replaced the O rings on the Benjamin PCP hand pump
1 x
Some days I'm Andy, most days I'm Barney........
Eaglescout, NRA Life Endowment member, BCCI Life Member
Eaglescout, NRA Life Endowment member, BCCI Life Member
- North Country Gal
- Firearms Advisor
- Posts: 6092
- Joined: Thu Apr 07, 2016 12:46 pm
- Location: northern Wisconsin
Re: Replaced the O rings on the Benjamin PCP hand pump
No, I haven't and hope not to. Maybe I'll send mine to you and let you fix it for me if it goes bad.
Seriously, I do have the Benjamin pump and, so far, no issues, probably because shooting PCP is such a small part of my shooting. Don't use the pump that often. That, and we did invest in scuba tanks when we bought into the PCP setup. (The only way I could shoot the higher psi stuff.)
I would like to shoot more PCP, this year, but the problem is that shooting PCPs is a bad match for my shooting personality. When I shoot, I just want to shoot without worrying about my shot count and I especially hate interrupting my shooting to do a refill.
Now, if I hunted, shooting PCP would be a whole different story. Would be doing a LOT more of it. As a strictly target shooter and plinker, though, I do fine with the springers and the pump ups. Still, I do have an exceptional PCP rifle in our Daystate CR-97 (not many of these older 90s technology PCPs made over to this country), so I do want to shoot it more. Gorgeous rifle with it's English Walnut stock. Picked it up at a ridiculously low price at an estate auction because no one else in the crowd even knew what that strange rifle was. (Air gun shooter are a rare breed, up here.)
Seriously, I do have the Benjamin pump and, so far, no issues, probably because shooting PCP is such a small part of my shooting. Don't use the pump that often. That, and we did invest in scuba tanks when we bought into the PCP setup. (The only way I could shoot the higher psi stuff.)
I would like to shoot more PCP, this year, but the problem is that shooting PCPs is a bad match for my shooting personality. When I shoot, I just want to shoot without worrying about my shot count and I especially hate interrupting my shooting to do a refill.
Now, if I hunted, shooting PCP would be a whole different story. Would be doing a LOT more of it. As a strictly target shooter and plinker, though, I do fine with the springers and the pump ups. Still, I do have an exceptional PCP rifle in our Daystate CR-97 (not many of these older 90s technology PCPs made over to this country), so I do want to shoot it more. Gorgeous rifle with it's English Walnut stock. Picked it up at a ridiculously low price at an estate auction because no one else in the crowd even knew what that strange rifle was. (Air gun shooter are a rare breed, up here.)
2 x
-
- Tenderfoot
- Posts: 48
- Joined: Tue Sep 06, 2016 7:13 pm
- Location: Ohio
Re: Replaced the O rings on the Benjamin PCP hand pump
I have built one of those Pumps in the past a time or two.
I like the FX and Hill Pumps in a 4 stage. Much eaiser to pump gun up with.
Got out of PCP Air guns back 5 o6 years ago. Bur wanting to get back into them badly..
I like the FX and Hill Pumps in a 4 stage. Much eaiser to pump gun up with.
Got out of PCP Air guns back 5 o6 years ago. Bur wanting to get back into them badly..
0 x
- North Country Gal
- Firearms Advisor
- Posts: 6092
- Joined: Thu Apr 07, 2016 12:46 pm
- Location: northern Wisconsin
Re: Replaced the O rings on the Benjamin PCP hand pump
Hi Dave. We use scuba tanks on our two PCP rifles, the Discovery included. Pumping is just too much of a hassle for this old gal. Been thinking about even getting out own compressor, too. I still shoot mostly springers, but I had a serious accident a couple years back that prevented me from even cocking the springers during my recovery. Really glad I had the PCPs that summer. Only way I could keep shooting.
0 x