Spring has sprung. Get out and shoot your Henry

Will a Barrel for an H001 go right onto an H001ML receiver?

Post Reply
shank3r
Tenderfoot
Posts: 4
Joined: Sun Jan 12, 2020 9:13 pm
United States of America

Will a Barrel for an H001 go right onto an H001ML receiver?

Post by shank3r » Mon Jan 13, 2020 7:18 am

I have a dead air mask that's currently waiting on Form 4 approval and in trying to figure out how to make it so that my kiddo's H001ML will accept a suppressor, I think I've come up with a solution.

Buy a H001 replacement barrel, have it cut down and threaded so that it's just a tad longer than the H001ML barrel in order to accept a thread on suppressor. My Local gun shop agree's that there is not enough barrel on the Mare's Leg to thread it w/o the suppressor hitting the magazine tube and they don't want to modify the tube and front mount.

Yes I know I'll have to remove the can to reload and I've accepted that reality.

I didn't buy the can specifically for the H001ML (even though it's the loudest 22LR I have, but my goal is to make the fun little plinker even more fun :)
0 x

User avatar
Sir Henry
Administrator / Owner
Posts: 12052
Joined: Sun Mar 20, 2016 10:58 pm
Location: Price County Wisconsin
United States of America

Re: Will a Barrel for an H001 go right onto an H001ML receiver?

Post by Sir Henry » Mon Jan 13, 2020 11:53 am

I don’t believe Henry will sell just a barrel. You will need to send them the receiver and bolt so they can match it up. You might be able to find a used barrel but I would question its history.

Too answer your question yes it can be done but you really need to know what you are doing.
1 x
Hi, my name is Gene and I'm a Henryholic from Wisconsin.

Range Reporter: Henry Repeater

User avatar
PT7
Drover
Posts: 4889
Joined: Mon Mar 21, 2016 8:32 am
Location: The Show-Me State
United States of America

Re: Will a Barrel for an H001 go right onto an H001ML receiver?

Post by PT7 » Mon Jan 13, 2020 5:51 pm

Have you looked at the suppressor-ready Henry H001TSPR?
1 x

~Пока~

shank3r
Tenderfoot
Posts: 4
Joined: Sun Jan 12, 2020 9:13 pm
United States of America

Re: Will a Barrel for an H001 go right onto an H001ML receiver?

Post by shank3r » Tue Jan 14, 2020 7:03 am

PT7 wrote:
Mon Jan 13, 2020 5:51 pm
Have you looked at the suppressor-ready Henry H001TSPR?
Yes, I'd prefer to keep the pistol and make it can compatible.
1 x

shank3r
Tenderfoot
Posts: 4
Joined: Sun Jan 12, 2020 9:13 pm
United States of America

Re: Will a Barrel for an H001 go right onto an H001ML receiver?

Post by shank3r » Tue Jan 14, 2020 7:07 am

Sir Henry wrote:
Mon Jan 13, 2020 11:53 am
I don’t believe Henry will sell just a barrel. You will need to send them the receiver and bolt so they can match it up. You might be able to find a used barrel but I would question its history.

Too answer your question yes it can be done but you really need to know what you are doing.
I'm going to have my local shop do all the work, just trying to gather info and parts.
1 x

Post Reply