Spring has sprung. Get out and shoot your Henry
Beautiful Craftsmanship
Re: Beautiful Craftsmanship
As an 'anybody', I too am unafraid to play with the wood finish. It is amazing what you can do to change the look. Go for it!
0 x
Remember, it's not how many guns you have. It's how many bullets you have.
Re: Beautiful Craftsmanship
Largely in part true.Anybody could do it, it is very simple!
There are some basics to learn before setting out on it (ways to lift dents, repair damage and how to not create more! and finish options) but it's not rocket science!
I have refinished many old, or finished new stocks.
Last edited by Mistered on Tue Jun 04, 2019 12:21 pm, edited 1 time in total.
1 x
Re: Beautiful Craftsmanship
Very nice! You are putting ideas in my head.
0 x
NRA & 2nd Amendment Supporter. Lyman is my middle name.
Re: Beautiful Craftsmanship
Yeah badrat, I can only describe it as looking like chocolate. I don't really see any red, just dark brown and flat, not glossy. It is definitely doesn't look like mine, or most of those that I've seen. It may as well be hardwood, cause the grain is totally hidden.badrat55 wrote: ↑Mon Jun 03, 2019 6:59 pmI think he is referring to the tinted poly, Henry has always used walnut to my knowledge.
The finish has seemingly started getting darker and more red lately on the cheaper rifles.
I know they do the tinted poly for uniformity, but honestly it doesn't bother me.
It gives me something to mess with and improve!
Maybe a walmart thing, or possibley something new that they're doin......
1 x
Re: Beautiful Craftsmanship
I've stripped and refinished a Remington Model 31 16 ga. and a Remington Model 141 .35 rem. (both 50+ years old), both had a similar tinted varnish stain (not poly, though) covering up some pretty nice wood. So it's no new thing under the sun when it comes to trying to make gun stocks look uniformly the same .
0 x
Re: Beautiful Craftsmanship
You are absolutely correct, I've refinished many over the years like that and manufacturers have been doing it far longer than I've been at it!Yornoc3 wrote: ↑Wed Jun 05, 2019 9:38 amI've stripped and refinished a Remington Model 31 16 ga. and a Remington Model 141 .35 rem. (both 50+ years old), both had a similar tinted varnish stain (not poly, though) covering up some pretty nice wood. So it's no new thing under the sun when it comes to trying to make gun stocks look uniformly the same .
0 x
- BrokenolMarine
- Ranch Foreman
- Posts: 5770
- Joined: Sat Nov 26, 2016 8:28 am
- Location: South Central Oklahoma in the mountains
Re: Beautiful Craftsmanship
Very nice... Hidden treasures abound.
I can remember years ago, my ex, who loved to prowl thrift shops for old furniture, found a wardrobe. (We were in our early 20s, neither had any refinishing experience.) I bought a Formby's chemical stripper, and we started... Wipe on, let it sit, wipe off. Next thing I know the ex is screaming that I ruined the piece... The stripper running down had bleached the piece. I pointed to the directions, and my watch... I had followed them to the letter. STILL my fault.
Turned out, nothing had been bleached, the wardrobe was a steal at $75. A late 1800s piece with detailed inlays in the doors, as trim, and accents. Main wood was walnut. Inlays were maple, cherries, oaks, and exotics, like ebony and purlleheart. There were also burls, spalted, and even some mother of pearl. The blackened original varnish and wax and grime had hidden it. Years later, I found a bed frame in the attic of a house I bought with similar inlays, also hidden under blackened aged varnish. You just never know.
I can remember years ago, my ex, who loved to prowl thrift shops for old furniture, found a wardrobe. (We were in our early 20s, neither had any refinishing experience.) I bought a Formby's chemical stripper, and we started... Wipe on, let it sit, wipe off. Next thing I know the ex is screaming that I ruined the piece... The stripper running down had bleached the piece. I pointed to the directions, and my watch... I had followed them to the letter. STILL my fault.
Turned out, nothing had been bleached, the wardrobe was a steal at $75. A late 1800s piece with detailed inlays in the doors, as trim, and accents. Main wood was walnut. Inlays were maple, cherries, oaks, and exotics, like ebony and purlleheart. There were also burls, spalted, and even some mother of pearl. The blackened original varnish and wax and grime had hidden it. Years later, I found a bed frame in the attic of a house I bought with similar inlays, also hidden under blackened aged varnish. You just never know.
1 x
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.
by the way he treats those who can do nothing for him.
Re: Beautiful Craftsmanship
Absolutely awesome craftsmanship.
0 x
A individual can't be a Army
A individual can't be a Navy.
A individual can't be a Air Force
A individual can't be a Coast Guard
A individual can be a MARINE! Semper Fi.
A individual can't be a Navy.
A individual can't be a Air Force
A individual can't be a Coast Guard
A individual can be a MARINE! Semper Fi.
- RanchRoper
- Forum Ambassador
- Posts: 12681
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta
Re: Beautiful Craftsmanship
hmmmm, missed this post somehow....beautiful guns.
0 x
1860 Colt SA Richards Conversion Revolver .45C
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
- shootinthecinders
- Cowhand
- Posts: 143
- Joined: Sat Oct 21, 2017 7:48 pm
Re: Beautiful Craftsmanship
Great work; beautiful wood. It adds a lot of character to your firearms and makes them truly your own and unique.
0 x