Spring has sprung. Get out and shoot your Henry

New kitchen faucet

User avatar
Grunt67
Cowboy
Posts: 1879
Joined: Tue Jan 28, 2020 10:57 am
Location: Hartsville,TN
United States of America

New kitchen faucet

Post by Grunt67 » Thu Feb 06, 2020 5:33 pm

For those of you who have been so honored to replace a kitchen faucet, you know of which I speak. The old faucet was leaking, been repaired a few times, finally bought the farm. So bought a new one at Lowes, planned on reusing the same hoses if they were good.
Not any more.New faucet came with pex hoses made into the faucet, and rather long. Had to warm them a bit as they were curled in the box. The old nuts ( plastic, brass bolts ) were corroded. Had to apply some heat to break 'em loose. After that, everything went pretty smooth ( except the part about getting into the cabinet & reaching the back of the sink ).
With some help from my better half, we got her done. If this one lasts as long as to old one, I won't be doing that again, Whew!!
1 x
I rarely ever buy a rifle, but when I do, it's a Henry.

"Every day above ground, is a good day" ( Al Capone )

User avatar
krunchnik
Cowhand
Posts: 102
Joined: Tue Oct 09, 2018 6:07 pm
Location: Lakeland,TN
United States of America

Re: New kitchen faucet

Post by krunchnik » Thu Feb 06, 2020 9:05 pm

Have replaced our kitchen faucet 3 times-always with something a little on the cheaper side-darned things start dripping and no matter what brand I used they all started the drip-repair-still drips.
This time we bought a Price Pfister with the ceramic disc faucet handle inserts-couple years went by and sure enough the drip starts-so I purchased the repair set for hot and cold side-$13.00 for the set-and lo and behold they worked-Price Pfister all the way.
0 x
THE CROW

User avatar
markiver54
Deputy Marshal
Posts: 10281
Joined: Sun Nov 04, 2018 11:49 am
Location: Biue Ridge Mountains, NC
United States of America

Re: New kitchen faucet

Post by markiver54 » Thu Feb 06, 2020 9:17 pm

I have had no problems with Pfister. Very easy installs as well.
0 x
I'm your Huckleberry

User avatar
Mistered
Drover
Posts: 3372
Joined: Thu Jun 30, 2016 9:32 pm
Location: Wickiup Junction, OR
United States of America

Re: New kitchen faucet

Post by Mistered » Thu Feb 06, 2020 9:42 pm

For those of you who have been so honored to replace a kitchen faucet,
Literally 100s - I used to have a handyman service!
0 x

User avatar
markiver54
Deputy Marshal
Posts: 10281
Joined: Sun Nov 04, 2018 11:49 am
Location: Biue Ridge Mountains, NC
United States of America

Re: New kitchen faucet

Post by markiver54 » Thu Feb 06, 2020 9:45 pm

Mistered wrote:
Thu Feb 06, 2020 9:42 pm
For those of you who have been so honored to replace a kitchen faucet,
Literally 100s - I used to have a handyman service!
In the words of Ed himself..." Easy Peezy ".
0 x
I'm your Huckleberry

User avatar
BigAl52
Forum Ambassador
Posts: 13638
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: New kitchen faucet

Post by BigAl52 » Thu Feb 06, 2020 10:35 pm

Ive done enough of them to know I dont care if I ever do another one.
2 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

User avatar
markiver54
Deputy Marshal
Posts: 10281
Joined: Sun Nov 04, 2018 11:49 am
Location: Biue Ridge Mountains, NC
United States of America

Re: New kitchen faucet

Post by markiver54 » Thu Feb 06, 2020 10:44 pm

BigAl52 wrote:
Thu Feb 06, 2020 10:35 pm
Ive done enough of them to know I dont care if I ever do another one.
Don't get me wrong Al. Not anything anybody wants to do, but not that difficult either.
0 x
I'm your Huckleberry

User avatar
BigAl52
Forum Ambassador
Posts: 13638
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: New kitchen faucet

Post by BigAl52 » Thu Feb 06, 2020 10:49 pm

My wifes carehome when she still had it was a very old building. There wasnt anything in there that matched up with todays advancements in plumbing. I remember making 5 and 6 trips to either Lowes or Home Depot. About the forth trip my blood pressure needed some serious trigger time to come back down. Needless to say I dont care if I ever do another sink
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

User avatar
markiver54
Deputy Marshal
Posts: 10281
Joined: Sun Nov 04, 2018 11:49 am
Location: Biue Ridge Mountains, NC
United States of America

Re: New kitchen faucet

Post by markiver54 » Thu Feb 06, 2020 10:57 pm

Yea, I hear Ya Al. The only stress is having the right parts available w/o having to run back and forth to the home centers.
The job is not rocket science, it's easy, if Ya have what Ya need, and the tools to do it.
0 x
I'm your Huckleberry

Ozarkwoodswalker
Cowboy
Posts: 1088
Joined: Thu Nov 01, 2018 9:24 pm
Location: Missouri
United States of America

Re: New kitchen faucet

Post by Ozarkwoodswalker » Sun Jul 17, 2022 10:04 am

I fixed mine a couple years ago. ( professional Plumbers are wonderful). I saved money by doing it myself... but a headache for a halfwit such as myself.. a fifteen minute job took me two hours ( and many a heartfelt curse world) I got it fixed.. has worked fine ever since.
Disturbing detail, when I was finished I one extra piece left over that I couldn't find a place to screw on... I started to tear it all apart to determine where it was supposed to go, however good sense took over at the last second, and I said wait,... everything is working just fine.... don't mess with sleeping dogs... so i put up my tools and tip toed away... and all is still fine two years later.....😉
0 x

Post Reply