Spring has sprung. Get out and shoot your Henry
AW .357 may be heading to Henry repair
AW .357 may be heading to Henry repair
First time I cleaned my AW rifle, I saw the front bead dovetail was loose and it easily drifted out with my fingers. Henry addressed the issue by sending me a new sight.
Cleaned my rifle yesterday after some range time, and thought I'd put on the new bead sight this afternoon. Same thing happened with the second sight. I was able to drift it in again only with my fingers to almost a fully-centered position! But I'm certain it's not a tight enough fit to stay in.
Wrote to Henry Rice Lake today. The original sight had "56B" on the base, and the replacement sight has "49B" marked on the base. Don't know if it's a sight size issue, or if the cut on the barrel is out-of-whack. I'm ready to send it in for repair this time. Kind of an unusual feeling to finger-drift in a sight without a punch.
PT7
Cleaned my rifle yesterday after some range time, and thought I'd put on the new bead sight this afternoon. Same thing happened with the second sight. I was able to drift it in again only with my fingers to almost a fully-centered position! But I'm certain it's not a tight enough fit to stay in.
Wrote to Henry Rice Lake today. The original sight had "56B" on the base, and the replacement sight has "49B" marked on the base. Don't know if it's a sight size issue, or if the cut on the barrel is out-of-whack. I'm ready to send it in for repair this time. Kind of an unusual feeling to finger-drift in a sight without a punch.
PT7
0 x
~Пока~
- fortyshooter
- Ranch Foreman
- Posts: 6299
- Joined: Sat Dec 09, 2017 10:37 am
- Location: Va.
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19340
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: AW .357 may be heading to Henry repair
looking forward to following the warranty service process
0 x
Re: AW .357 may be heading to Henry repair
That's a bummer, PT! You know they'll make it right, so please do keep us posted! I see a new barrel in your future!
0 x
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357
- RanchRoper
- Forum Ambassador
- Posts: 12692
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta
Re: AW .357 may be heading to Henry repair
Good luck. Hope it gets fixed up soon.
0 x
1860 Colt SA Richards Conversion Revolver .45C
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
Re: AW .357 may be heading to Henry repair
Not really a bummer; rather, interesting. How many of us have had the chance to drift a dovetail sight with two fingers?!?
Actually, your comment on a new barrel is something to think about. The bore of this rifle is immaculate, clean and clear as glass. It's the best-looking barrel and rifling I've seen on any of the Henrys I've had. Would not like to lose it. Might call for some mulling before FedEx gets into the picture...
Actually, your comment on a new barrel is something to think about. The bore of this rifle is immaculate, clean and clear as glass. It's the best-looking barrel and rifling I've seen on any of the Henrys I've had. Would not like to lose it. Might call for some mulling before FedEx gets into the picture...
ESquared wrote:That's a bummer, PT! You know they'll make it right, so please do keep us posted! I see a new barrel in your future!
0 x
~Пока~
- markiver54
- Deputy Marshal
- Posts: 10305
- Joined: Sun Nov 04, 2018 11:49 am
- Location: Biue Ridge Mountains, NC
Re: AW .357 may be heading to Henry repair
Some may know, I have the opposite problem on my SGC. My front dove tail was frozen in place. Has been in Henry hands since the 15th. Not too long ago, but still anxious to hear something. Guess they may be very busy! Trying to exercise patience.
0 x
I'm your Huckleberry
Re: AW .357 may be heading to Henry repair
And "Cockeyed" to boot! Did they issue you a Warranty tracking number so you can log in and see what you can see?markiver54 wrote:Some may know, I have the opposite problem on my SGC. My front dove tail was frozen in place. Has been in Henry hands since the 15th. Not too long ago, but still anxious to hear something. Guess they may be very busy! Trying to exercise patience.
1 x
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357
- markiver54
- Deputy Marshal
- Posts: 10305
- Joined: Sun Nov 04, 2018 11:49 am
- Location: Biue Ridge Mountains, NC
Re: AW .357 may be heading to Henry repair
Yes, I have a HWS# and access code # that I check almost every day, but nothing yet. I think an email to Tom, or a call might be in order this week. I bought it cause I want to shoot it!!ESquared wrote:And "Cockeyed" to boot! Did they issue you a Warranty tracking number so you can log in and see what you can see?markiver54 wrote:Some may know, I have the opposite problem on my SGC. My front dove tail was frozen in place. Has been in Henry hands since the 15th. Not too long ago, but still anxious to hear something. Guess they may be very busy! Trying to exercise patience.
0 x
I'm your Huckleberry
Re: AW .357 may be heading to Henry repair
Yep, going on two weeks for something that simple gives you permission to start being the squeaky wheel. Call 'em up!
1 x
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357