Spring has sprung. Get out and shoot your Henry
CCH Large Loop?
CCH Large Loop?
There are now a few of us who have a CCH rifle of one stripe or another, but ownership certainly isn't necessary to weigh in on this.
It's a bit odd to me that Henry's factory spec for this line does NOT include a CCH lever. I'm guessing it's a cost of goods/price point issue.
Anyway, they offer a Large Loop CCH Lever as an aftermarket part for 85 bucks. I have a large loop Henry (SGC), while the rest are small loops, and, from a feel and function standpoint, I couldn't list any differences. I have big hands and, even with gloves (a couple of layers of gloves, in fact), the regular size loop works fine for me. So, to me, it's just cosmetics.
What do you all think? Is the large loop CCH lever too much/too big on the CCH lineup? Is it too much CCH overall? Is $85 just too much for a cosmetic upgrade, no matter how big or small it is?
I'm truly on the fence. Any opinions?
https://henrypride.com/collections/rifl ... loop-lever
It's a bit odd to me that Henry's factory spec for this line does NOT include a CCH lever. I'm guessing it's a cost of goods/price point issue.
Anyway, they offer a Large Loop CCH Lever as an aftermarket part for 85 bucks. I have a large loop Henry (SGC), while the rest are small loops, and, from a feel and function standpoint, I couldn't list any differences. I have big hands and, even with gloves (a couple of layers of gloves, in fact), the regular size loop works fine for me. So, to me, it's just cosmetics.
What do you all think? Is the large loop CCH lever too much/too big on the CCH lineup? Is it too much CCH overall? Is $85 just too much for a cosmetic upgrade, no matter how big or small it is?
I'm truly on the fence. Any opinions?
https://henrypride.com/collections/rifl ... loop-lever
0 x
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357
Re: CCH Large Loop?
Come on Evan. I know what Lucas McCain would say
2 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19340
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: CCH Large Loop?
IF they ever come up with a large loop lever (CCH or standard blue) for our CCH 45-70 with a pistol grip, I'll place an order the day I find out about it
0 x
Re: CCH Large Loop?
Yes, if it's not needed. Thats a lot of powder, ball & cap.Is $85 just too much for a cosmetic upgrade, no matter how big or small it is?
And besides I would hardly call it 'cosmetic' - it takes away from the trim appearance of most lever action rifles.
1 x
Re: CCH Large Loop?
Since you asked, Evan, I will share an opinion even though I don't have a Henry CCH rifle. All of the new SA revolvers I've recently acquired have components that are CCH....that finish does provide a sharp-looking design.
When you noted it is just cosmetics, that is an important part of it. You also said that either the large loop or small loop work well (feel & function) for you on your rifles. If it were me, I would just answer this question about how my rifle looks: Do I like the CCH appearance so much that it would be FUN to have a CCH large loop lever on my Henry? Finally, $85 would not be an excessive expense, if you really want to have a CCH large loop lever.
I've done very little cosmetic changes to my Henrys, and the same approach now for my new ownership of SA Cowboy-action revolvers. Mostly prefer the stock look, as that is how I decide on which firearm to get. I did a little of the "fence riding" you're doing when I special ordered a bronze receiver-mounted Skinner peep to replace the stock rear sight on my SGC. It was spendy. But that "touch of bronze," as I hoped it would, added a really special appearance to my Carbine. Glad I don't often go after such mods; but this one turned out great.
Best as you decide...that is fun, too. Sure hope there are not too many splinters in that fence you're riding!
PT7
When you noted it is just cosmetics, that is an important part of it. You also said that either the large loop or small loop work well (feel & function) for you on your rifles. If it were me, I would just answer this question about how my rifle looks: Do I like the CCH appearance so much that it would be FUN to have a CCH large loop lever on my Henry? Finally, $85 would not be an excessive expense, if you really want to have a CCH large loop lever.
I've done very little cosmetic changes to my Henrys, and the same approach now for my new ownership of SA Cowboy-action revolvers. Mostly prefer the stock look, as that is how I decide on which firearm to get. I did a little of the "fence riding" you're doing when I special ordered a bronze receiver-mounted Skinner peep to replace the stock rear sight on my SGC. It was spendy. But that "touch of bronze," as I hoped it would, added a really special appearance to my Carbine. Glad I don't often go after such mods; but this one turned out great.
Best as you decide...that is fun, too. Sure hope there are not too many splinters in that fence you're riding!
PT7
ESquared wrote:There are now a few of us who have a CCH rifle of one stripe or another, but ownership certainly isn't necessary to weigh in on this.
It's a bit odd to me that Henry's factory spec for this line does NOT include a CCH lever. I'm guessing it's a cost of goods/price point issue.
Anyway, they offer a Large Loop CCH Lever as an aftermarket part for 85 bucks. I have a large loop Henry (SGC), while the rest are small loops, and, from a feel and function standpoint, I couldn't list any differences. I have big hands and, even with gloves (a couple of layers of gloves, in fact), the regular size loop works fine for me. So, to me, it's just cosmetics.
What do you all think? Is the large loop CCH lever too much/too big on the CCH lineup? Is it too much CCH overall? Is $85 just too much for a cosmetic upgrade, no matter how big or small it is?
I'm truly on the fence. Any opinions?
https://henrypride.com/collections/rifl ... loop-lever
0 x
~Пока~
Re: CCH Large Loop?
Hilarious. Spot on!BigAl52 wrote:Come on Evan. I know what Lucas McCain would say
0 x
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357
-
- Cattle Driver
- Posts: 725
- Joined: Sun Jul 24, 2016 6:53 pm
- Location: Shenandoah Valley, VA
Re: CCH Large Loop?
I think they do offer one on their Henry Pride website - $50 for a big loop lever that fits H010 and H018 Henry's... It is also offered in CCH.JEBar wrote:IF they ever come up with a large loop lever (CCH or standard blue) for our CCH 45-70 with a pistol grip, I'll place an order the day I find out about it
0 x
US Submarine Service 1976-2006
Henry H001TLP,H001TLB,H003T,H004,H006R,H006M,H012R,H012AW,H012MRCC,H010CC,H015-357,H015-44,H015-4570
Winchester 9422,1873,1885,1886,1892
Marlin 39A,AS,CL,D,M,Mountie,TDS,1897CB,Texan,1894CB,1895CBA,1895SBL
Ruger #1 44Mag
Henry H001TLP,H001TLB,H003T,H004,H006R,H006M,H012R,H012AW,H012MRCC,H010CC,H015-357,H015-44,H015-4570
Winchester 9422,1873,1885,1886,1892
Marlin 39A,AS,CL,D,M,Mountie,TDS,1897CB,Texan,1894CB,1895CBA,1895SBL
Ruger #1 44Mag
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19340
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: CCH Large Loop?
tractortad wrote:I think they do offer one on their Henry Pride website - $50 for a big loop lever that fits H010 and H018 Henry's... It is also offered in CCH.JEBar wrote:IF they ever come up with a large loop lever (CCH or standard blue) for our CCH 45-70 with a pistol grip, I'll place an order the day I find out about it
OUTSTANDING .... I called Henry shortly after buying our 45-70 and was told that they didn't have them .... didn't realize they have now been added .... can only wish one with a CCH finish is available .... looks like I now know for sure what I want to buy myself for Christmas .. .. info appreciated ...
0 x
Re: CCH Large Loop?
I don't see such a CCH lever (Large Loop for H018/H010) on Henry Pride. Am I just too blind to see it?
0 x
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357
Re: CCH Large Loop?
Is this the one Tractortad is noting?
https://henrypride.com/collections/rifl ... 2256333849
https://henrypride.com/collections/rifl ... 2256333849
ESquared wrote:I don't see such a CCH lever (Large Loop for H018/H010) on Henry Pride. Am I just too blind to see it?
Last edited by PT7 on Thu Nov 15, 2018 11:44 am, edited 1 time in total.
0 x
~Пока~