Spring has sprung. Get out and shoot your Henry
Can I fix it?
Can I fix it?
My new Big Boy steel rifle is developing a problem.
Model H012M327 in .327 Fed/mag
The first 100 or so rounds ran flawlessly.
The subsequent 300 rounds or so have been problematic.
I'm now getting light primer strikes resulting in a failure to fire.
The problem seems to be exacerbated with use.
The more I shoot, the more often it occurs.
I'm now getting a failure to fire about 30% of the time, and I'm using factory Federal American Eagle ammo.
I've run many different lots of ammo, as well as a couple of other brands.
I'm having problems regardless of the ammo manufacturer.
I've deep cleaned and properly lubed the rifle, but to no avail.
Is there anything I can do, or does my rifle need to go back to Bayonne for a visit?
Model H012M327 in .327 Fed/mag
The first 100 or so rounds ran flawlessly.
The subsequent 300 rounds or so have been problematic.
I'm now getting light primer strikes resulting in a failure to fire.
The problem seems to be exacerbated with use.
The more I shoot, the more often it occurs.
I'm now getting a failure to fire about 30% of the time, and I'm using factory Federal American Eagle ammo.
I've run many different lots of ammo, as well as a couple of other brands.
I'm having problems regardless of the ammo manufacturer.
I've deep cleaned and properly lubed the rifle, but to no avail.
Is there anything I can do, or does my rifle need to go back to Bayonne for a visit?
0 x
- CT_Shooter
- Administrator emeritus
- Posts: 5156
- Joined: Mon Mar 21, 2016 8:42 am
- Location: Connecticut
Re: Can I fix it?
About three years ago, I had that happen with my Big Boy, too. I didn't even consider DYI.Mgderf wrote: I'm now getting light primer strikes resulting in a failure to fire.
The problem seems to be exacerbated with use.
The more I shoot, the more often it occurs.
Henry turned it around within ten days. The bolt has a two piece firing pin and the piece in the rear had to be replaced. At the same time, they also replaced the locking bar and the transfer bar.
0 x
H006M Big Boy Brass .357 - H001 Classic .22LR - Uberti / Taylors & Co. SmokeWagon .357 5.5" - Uberti / Taylors & Co. RanchHand .22LR 5.5"
Re: Can I fix it?
30% FTF sounds high. Since you've eliminated ammo as the culprit, I'd go with having Henry check out your BB. They will get it firing correctly. Henry service for my rifles has been especially helpful to me, especially since I have minimal gunsmithing skills.
1 x
~Пока~
- North Country Gal
- Firearms Advisor
- Posts: 6093
- Joined: Thu Apr 07, 2016 12:46 pm
- Location: northern Wisconsin
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19348
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: Can I fix it?
agree with the others .... send it back .... I think too much of our Henry rifles to work on them myself ..
0 x
Re: Can I fix it?
I went ahead and emailed Henry to request warranty service.
Really don't want to send it back, but I do want it to run as advertised, so...
Really don't want to send it back, but I do want it to run as advertised, so...
0 x
- Sir Henry
- Administrator / Owner
- Posts: 12125
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: Price County Wisconsin
Re: Can I fix it?
I agree with everyone about sending it back.
0 x
Hi, my name is Gene and I'm a Henryholic from Wisconsin.
Range Reporter: Henry Repeater
Range Reporter: Henry Repeater
- Shakey Jake
- Drover
- Posts: 4346
- Joined: Wed Aug 16, 2017 11:10 am
- Location: Sugar Land, TX
- Contact:
Re: Can I fix it?
I'd send it back also. I've got a .327 BB Steel myself. So far no problems and I've run probably 1000 rounds through it at least. <Edit: Let us know how it goes. I'm hoping I don't run into the same problem.>
0 x
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19348
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: Can I fix it?
good move .... they have a history of rapid turnaround rates, she'll be back soonMgderf wrote:It's on it's way back to Rice Lake.
0 x