Spring has sprung. Get out and shoot your Henry
Hi folks, first post, sorry but .357 HO12GMR misfires 100%
Hi folks, first post, sorry but .357 HO12GMR misfires 100%
Hi all,
Sorry for a negative first post. I recently bought the carbine.357
at a great price new. Really like this gun, I also have a Marlin SBL
carbine in .44 and a Rossi in .454.
I wanted a lighter caliber to match up with my .357 for woods
carry, I have a lot of black bear and moose at my vacation property in NH of over 140 acres. I’m getting a bit older and want to move to
less recoil and weight though the .44 Marlin ain’t bad but lugging a 4” smith on my hip ain’t in .44 mag.
Anyway my new Henry stopped working, was gonna chrono some buffalo bore and underwood the other day and… click.
Waited for a bit, ejected round and not even a dimple on primer.
Tried again, click. Tried ammo I shot week before, click. Not even a dimple.
No warning of a failure, I’m thinking it’s gotta be the firing pin.
Called Henry, they’re sending a shipping label, hopefully here tomorrow.
Not thrilled about that, I asked for a firing pin, though I admit I haven’t confirmed it’s broken, but removing the bolt and pressing the pin and the disconnect thing in the bolt I could not see
the pin protruding.
What’s not feeling right is they deem the firing pin a restricted part
and won’t ship out replacement or spares. Never had that with many other gun makers with broken firing pins happening.
I saw a thread here with something similar but it wasn’t followed up
by the poster on how it got resolved.
Honestly I have no choice but to give Henry a chance but
shipping the whole rifle is a pain.
Rich
Sorry for a negative first post. I recently bought the carbine.357
at a great price new. Really like this gun, I also have a Marlin SBL
carbine in .44 and a Rossi in .454.
I wanted a lighter caliber to match up with my .357 for woods
carry, I have a lot of black bear and moose at my vacation property in NH of over 140 acres. I’m getting a bit older and want to move to
less recoil and weight though the .44 Marlin ain’t bad but lugging a 4” smith on my hip ain’t in .44 mag.
Anyway my new Henry stopped working, was gonna chrono some buffalo bore and underwood the other day and… click.
Waited for a bit, ejected round and not even a dimple on primer.
Tried again, click. Tried ammo I shot week before, click. Not even a dimple.
No warning of a failure, I’m thinking it’s gotta be the firing pin.
Called Henry, they’re sending a shipping label, hopefully here tomorrow.
Not thrilled about that, I asked for a firing pin, though I admit I haven’t confirmed it’s broken, but removing the bolt and pressing the pin and the disconnect thing in the bolt I could not see
the pin protruding.
What’s not feeling right is they deem the firing pin a restricted part
and won’t ship out replacement or spares. Never had that with many other gun makers with broken firing pins happening.
I saw a thread here with something similar but it wasn’t followed up
by the poster on how it got resolved.
Honestly I have no choice but to give Henry a chance but
shipping the whole rifle is a pain.
Rich
0 x
Re: Hi folks, first post, sorry but .357 HO12GMR misfires 100%
BTW only 50 or so rounds mostly.38 thru it
0 x
- Vaquero
- Ranch Boss
- Posts: 10408
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Re: Hi folks, first post, sorry but .357 HO12GMR misfires 100%
I agree on the shipping it back being a PITA, but that's Henry.
Replacing the firing is no big undertaking, have done it on a Marlin before and Henry's bolt is a copy of the marlin.
Probably a 10-15 minute job tops.
Sucks having to send a brand new rifle back already.
You might as well just do as they say.
Welcome from central W TN, hope they get you fixed up in short order.
RP
Replacing the firing is no big undertaking, have done it on a Marlin before and Henry's bolt is a copy of the marlin.
Probably a 10-15 minute job tops.
Sucks having to send a brand new rifle back already.
You might as well just do as they say.
Welcome from central W TN, hope they get you fixed up in short order.
RP
2 x
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Re: Hi folks, first post, sorry but .357 HO12GMR misfires 100%
Hey Richd, welcome from Nebraska. Sorry you ran into trouble. My 357 is my favorite. Good luck with the repairs. Hope it's not long.
1 x
Remember, it's not how many guns you have. It's how many bullets you have.
Re: Hi folks, first post, sorry but .357 HO12GMR misfires 100%
Thanks folks! I’m more taken aback by a firing pin being a restricted part than anything else.
Tried posting a picture can’t figure out how maybe too new yet here. I’ve made changes already, cut the LOP to my liking and removed the rubber sticky butt pad( they always hang up on my shirt or jacket). I put a Leopold delta point pro in a low profile mount ( had the sight sitting around not my first choice) and a rail adapter for a light. Everything was coming together then click
A buddy says I should test guns, I have bad luck with stuff like this lol.
Tried posting a picture can’t figure out how maybe too new yet here. I’ve made changes already, cut the LOP to my liking and removed the rubber sticky butt pad( they always hang up on my shirt or jacket). I put a Leopold delta point pro in a low profile mount ( had the sight sitting around not my first choice) and a rail adapter for a light. Everything was coming together then click
A buddy says I should test guns, I have bad luck with stuff like this lol.
0 x
Re: Hi folks, first post, sorry but .357 HO12GMR misfires 100%
Hope things work out soon! At least, you have a Marlin and Rossi to fall back on.
0 x
Actions speak louder than words (Matthew 7:16-20).
Re: Hi folks, first post, sorry but .357 HO12GMR misfires 100%
Welcome to the Henry forum. I had an issue with a new 357 carbine and Henry had it back in my hands in a week. I wasn't happy about the problem but they made it right quickly. Hope they get your rifle fixed to your just as fast.
0 x
- fortyshooter
- Ranch Foreman
- Posts: 6353
- Joined: Sat Dec 09, 2017 10:37 am
- Location: Va.
Re: Hi folks, first post, sorry but .357 HO12GMR misfires 100%
Must be recommended by their legal team to have Henry do the repair for safety reasons. Haven't had that issue yet with my 357 Henry.
1 x
Re: Hi folks, first post, sorry but .357 HO12GMR misfires 100%
So I called and also filled out repair ticket first thing Monday morning. The lady said they would get a shipping label to me in 48hrs.
Nothing yet, USPS informed email ( It comes early every day telling you what is coming today) shows nothing. Henry not open yet but going to call again today. I saw a video on YouTube yesterday, a guy with a .44 brass receiver rifle had misfires. Took him 3 returns before it got fixed. I don’t know if he’s the poster in the other thread or not. He was finally happy. Hoping for same. Maybe Henry reads in here.
Rich
Nothing yet, USPS informed email ( It comes early every day telling you what is coming today) shows nothing. Henry not open yet but going to call again today. I saw a video on YouTube yesterday, a guy with a .44 brass receiver rifle had misfires. Took him 3 returns before it got fixed. I don’t know if he’s the poster in the other thread or not. He was finally happy. Hoping for same. Maybe Henry reads in here.
Rich
0 x
Re: Hi folks, first post, sorry but .357 HO12GMR misfires 100%
Henry will fix you up. This happens way to frequently anymore. I agree with the PITA sending one back but its happened to me 3 times. I had to send one back twice before it was right. Hopefully the turn around time will be quick. Welcome to the forum. Let us know how it all turns out
2 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55