Spring has sprung. Get out and shoot your Henry
3030 Sidegate
3030 Sidegate
So, it seems to me that the spring behind the loading gate is way too strong and the inside edges of the receiver opening are way too sharp, causing skin loss on my thumb. Just curious if anyone else has encountered this issue.
0 x
Re: 3030 Sidegate
I did on my Marlins. After about 100 rounds or so, it loosened some. Now, I can unload from the loading gate as well.
0 x
Actions speak louder than words (Matthew 7:16-20).
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19272
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: 3030 Sidegate
this brings a question to mind ===> on the new Henry rifles, is it easy to remove the slide loading gate ..
0 x
Re: 3030 Sidegate
Ya and people love them because they are cool with the sidegate. This is why I use the tube.
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
- fortyshooter
- Ranch Foreman
- Posts: 6270
- Joined: Sat Dec 09, 2017 10:37 am
- Location: Va.
Re: 3030 Sidegate
That sounds like the Rossi 92 issue. If I remember I think when I had my Rossi torn down I added a shim between the gate and receiver to reduce the spring tension and also stoned around the opening. Loads nice now and this was the Ranch Hand .45 Colt.
0 x
Re: 3030 Sidegate
I agree that a tube load makes unloading easier. So, the sidegate load with a tube load is a great combination. I have my eye out now for a 12 gauge. But, who knows. I was looking for a 12 gauge, when I purchased a S&W .357 a few weeks ago. I may come across a Henry with sidegate that catches my eye.
I am learning to be open with things. That how I got the Henry that I have now. I was looking for a Marlin, and a Henry caught my eye. Yet, I will admit; a Maple finished Marlin caught my eye last week. But, I trying to convince myself that I have enough rifles for now. I guess I will see how that goes.
I am learning to be open with things. That how I got the Henry that I have now. I was looking for a Marlin, and a Henry caught my eye. Yet, I will admit; a Maple finished Marlin caught my eye last week. But, I trying to convince myself that I have enough rifles for now. I guess I will see how that goes.
Last edited by GFK on Thu Dec 31, 2020 12:24 pm, edited 1 time in total.
0 x
Actions speak louder than words (Matthew 7:16-20).
- RanchRoper
- Forum Ambassador
- Posts: 12681
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta
Re: 3030 Sidegate
This is why Oliver Winchester said to B Tyler Henry one day, "this side gate keeps ripping my thumb, can you come up with something that will help?"....and the 1860 was born!
Ok my history is flawed but it does make sense....
Ok my history is flawed but it does make sense....
4 x
1860 Colt SA Richards Conversion Revolver .45C
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
Re: 3030 Sidegate
I liked the appearance and idea of the side gate, and after trying two inner mag tubes to try to cure loading hangups on the 3030 cartridge rims, I have come to appreciate the convenience that the side gate offers. I can't imagine the HRA would find that my issue is worthy of a trip back to the factory, so I think that I am going to try a little homegrown tweakin. Thanks for the input. Happy New Year All!
2 x
Re: 3030 Sidegate
I disagree with your comment. If you have a concern, Henry will try to address it. My rifle was returned (haven't been shot yet) because of a fouling concern. I was giving it a cleaning before my first shooting, and the patches were coming out with a blueish green color. I contacted Henry with my concern, and the rifle was returned. Mind you, I still had patches with a blueish green color after shooting, less now. But, Henry did attempt to address my concern.
Now, I just clean, until carbon residue is removed. I do not concern myself with any copper that may be in pits of the grooves. I figured that it may help the bullet to travel smoother. So, shoot Henry an e-mail or give them a call. You have nothing to lose and may gain a smoother operating loading gate.
Now, I just clean, until carbon residue is removed. I do not concern myself with any copper that may be in pits of the grooves. I figured that it may help the bullet to travel smoother. So, shoot Henry an e-mail or give them a call. You have nothing to lose and may gain a smoother operating loading gate.
0 x
Actions speak louder than words (Matthew 7:16-20).
Re: 3030 Sidegate
On the Rossi, at least, it’s reputed that propping the loading gate open with a pencil for a week will lessen the force required to open and load. On my Rossi, I went with hourglass grinding the spring and chamfering the edge, as recommended by Steve Gunz. Works much better!
There’s not a lot of info on disassembly of the newer sidegate Henry’s, especially my H012CX model.
There’s not a lot of info on disassembly of the newer sidegate Henry’s, especially my H012CX model.
0 x