Get out and shoot during the good weather then come back here and share it with us

Hammer Extensions

cocojo
Tenderfoot
Posts: 5
Joined: Tue Jan 01, 2019 5:58 pm
United States of America

Re: Hammer Extensions

Post by cocojo » Wed Jan 09, 2019 5:48 am

They probably do! The hanmer on my henry H015 shotgun is the same size as my henry H009 30-30. Grov Tech is what I bought. The old pre safety Marlin 336 hammer spur which was made until 1982 fits the Henry correctly. The Hammer spur on the single shot shotgun really helped with cocking, its much better. I put a scope on my 30-30 so a hammer spur is necessary for proper function.
0 x

User avatar
BigAl52
Deputy Marshal
Posts: 3460
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: Hammer Extensions

Post by BigAl52 » Wed Jan 09, 2019 9:14 am

Hunter2678 wrote:can anyone comment or verify if the grovetec extension for henry big boy 2010 to present will fit the henry all weather? lookin like it does...
I have one coming for my 357 Single shot should be here by weeks end I can confirm that for you then. I have an AW in 45-70.
1 x
Young guys should hang out with old guys cause old guys know something

SGC .22LR .22MAG
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBBC .45 COLT
CCH 45-70
AW 45-70
BBS .41 MAG
BBB .357
CCHC .357
SS .357
SIDE GATE 38-55

User avatar
Hunter2678
Tenderfoot
Posts: 24
Joined: Thu Jan 03, 2019 8:25 am
Location: Central Ohio
United States of America

Re: Hammer Extensions

Post by Hunter2678 » Wed Jan 09, 2019 9:59 am

BigAl52 wrote:
Hunter2678 wrote:can anyone comment or verify if the grovetec extension for henry big boy 2010 to present will fit the henry all weather? lookin like it does...
I have one coming for my 357 Single shot should be here by weeks end I can confirm that for you then. I have an AW in 45-70.
ok thanks
0 x

User avatar
BigAl52
Deputy Marshal
Posts: 3460
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: Hammer Extensions

Post by BigAl52 » Thu Jan 10, 2019 7:54 pm

Hunter2678 wrote:
BigAl52 wrote:
Hunter2678 wrote:can anyone comment or verify if the grovetec extension for henry big boy 2010 to present will fit the henry all weather? lookin like it does...
I have one coming for my 357 Single shot should be here by weeks end I can confirm that for you then. I have an AW in 45-70.

ok thanks
Hunter the Grovetec hammer extender fits the all weather perfect. Got mine today. Al
4 x
Young guys should hang out with old guys cause old guys know something

SGC .22LR .22MAG
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBBC .45 COLT
CCH 45-70
AW 45-70
BBS .41 MAG
BBB .357
CCHC .357
SS .357
SIDE GATE 38-55

User avatar
Hunter2678
Tenderfoot
Posts: 24
Joined: Thu Jan 03, 2019 8:25 am
Location: Central Ohio
United States of America

Re: Hammer Extensions

Post by Hunter2678 » Thu Jan 10, 2019 9:56 pm

awesome..thanks
0 x

Yornoc3
Cowhand
Posts: 406
Joined: Sun Apr 30, 2017 4:48 pm
United States of America

Re: Hammer Extensions

Post by Yornoc3 » Mon Jan 14, 2019 6:41 pm

I learned, through another post somewhere around here, that Henry - and Carlson's - has replaced their aluminum Hammer Extender with a steel version. There were some shooters finding the aluminum models to be bending after repeated use. I have the aluminum Carlson's model marked Henry on mine, with no problems, but not a lot of rounds fired yet, either. Since I do like Carlson's design, I ordered a couple of the steel version today, for two rifles that don't have 'em yet. As you'd expect, Henry has replaced the failed aluminum model for those that had failures, and contacted them about it.
1 x

User avatar
shootest
Tenderfoot
Posts: 39
Joined: Wed Jan 02, 2019 4:22 pm
United States of America

Re: Hammer Extensions

Post by shootest » Sun Jan 20, 2019 8:25 am

A shameless pic and post count increase of my BBS .357 with hammer extension. :D
8B008053-9238-49FA-B8EC-F0CA99A7FC91.jpeg
You do not have the required permissions to view the files attached to this post.
2 x
Texas, not just a State but a state of mind.

Florida_Cracker
Tenderfoot
Posts: 17
Joined: Thu Jun 15, 2017 5:20 pm
Location: Bradenton, Fl
United States of America

Re: Hammer Extensions

Post by Florida_Cracker » Sun Jan 27, 2019 4:12 pm

I got one for the Henry at Brownells. Seems like they had two brands to chose from at the time. Just search "hammer extension". This is the one I got - you can mount it either left or right of the hammer.
https://www.brownells.fi/2458-Hammer-Extension
0 x

Post Reply