Spring has sprung. Get out and shoot your Henry
A couple January Projects to Start the New Year...
- BrokenolMarine
- Ranch Foreman
- Posts: 5805
- Joined: Sat Nov 26, 2016 8:28 am
- Location: South Central Oklahoma in the mountains
A couple January Projects to Start the New Year...
After the shop cleanup and reorganization, it was time to start off the new year. I had hoped to perhaps try restocking one of the rifles ... but on advice from several, I have decided to put that off and start learning to use my spokeshaves with another project.. I'll try and make a cane/walking stick. I had planned to do that anyway.
The first step involved getting the wood from the boathouse, and I had to take a few things OUT of the woodshop out there anyway, so I had been loading them in the Ranger while I cleaned. I drove out there and put those away and found three nice pieces of wood. The first two were going to be for future boxes, ... or something. The one had been preplaned and then stored, when I was in the small shop and needed the room. The other, I see potential, but we'll have to see what the planer reveals.
This next piece will become my cane ... hopefully. Or kindling.
The first step involved getting the wood from the boathouse, and I had to take a few things OUT of the woodshop out there anyway, so I had been loading them in the Ranger while I cleaned. I drove out there and put those away and found three nice pieces of wood. The first two were going to be for future boxes, ... or something. The one had been preplaned and then stored, when I was in the small shop and needed the room. The other, I see potential, but we'll have to see what the planer reveals.
This next piece will become my cane ... hopefully. Or kindling.
0 x
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.
by the way he treats those who can do nothing for him.
- BrokenolMarine
- Ranch Foreman
- Posts: 5805
- Joined: Sat Nov 26, 2016 8:28 am
- Location: South Central Oklahoma in the mountains
Re: A couple January Projects to Start the New Year...
Back in the shop to start working on the projects. First up is cleaning up the two pieces that need planing. The cane blank will be run across the jointer first, and won't see the planer. What will it reveal? I spent a while taking as little as possible off the face until it was flat and smooth. It turned out beautiful.
I then ripped it in half down the middle and joined the flat faces. It shows potential. I think the grain will present well and be interesting enough.
Spread the glue and clamped er up.
While I had the dust collector out of the corner where she lives, I set up the planer and ran the long board thru. I was NOT disappointed. I will certainly find a project for that one.
0 x
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.
by the way he treats those who can do nothing for him.
- BrokenolMarine
- Ranch Foreman
- Posts: 5805
- Joined: Sat Nov 26, 2016 8:28 am
- Location: South Central Oklahoma in the mountains
Re: A couple January Projects to Start the New Year...
Back in the shop, and got the clamps off, began working on the shaping of the wood. First step was to trim the bark off with the band saw. Then use the plane and the spoke shaves to began shaping the body of the cane. I had to do this in stages as working with hand tools is work. I could use power sanders, or put a sanding drum in the drill press, but it's not the point of the thing. I want to learn to use the spoke shaves, and the pleasure of the labor, the journey is the thing.
It won't be your typical round walking stick, it will carry some weight and show off the grain and beauty of the walnut. AS you can see, I have put in a lot of work over the past few days. All the shavings you see came from the plane and the spokeshave... not a single tool was plugged in. In this vice is a laminated block that will become the grip mounted to the top of the cane. It's spalted maple, with a mahogany center. I will cut the rough shape on the bandsaw, then shape it with the spokeshave and sand to final smoothness and attach it with a bolt and epoxy. I hope this turns out, I think it will be unique, anyway. Even if it just stands in the corner... but I plan to use it.
After a couple days, I had made significant progress and it was looking like something. I had run the blank across the table saw and trimmed off a 1/4" in thickness to give it a more consistent shape before I got well into it.
The cane is beginning to show it's personality and I am seeing where I want to take things. I begin to work certain areas and define the shapes I want.It won't be your typical round walking stick, it will carry some weight and show off the grain and beauty of the walnut. AS you can see, I have put in a lot of work over the past few days. All the shavings you see came from the plane and the spokeshave... not a single tool was plugged in. In this vice is a laminated block that will become the grip mounted to the top of the cane. It's spalted maple, with a mahogany center. I will cut the rough shape on the bandsaw, then shape it with the spokeshave and sand to final smoothness and attach it with a bolt and epoxy. I hope this turns out, I think it will be unique, anyway. Even if it just stands in the corner... but I plan to use it.
1 x
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.
by the way he treats those who can do nothing for him.
- BrokenolMarine
- Ranch Foreman
- Posts: 5805
- Joined: Sat Nov 26, 2016 8:28 am
- Location: South Central Oklahoma in the mountains
Re: A couple January Projects to Start the New Year...
Got the block out of the clamps and started shaping the cane's handle. Lot's more work to do, but it's taking shape.
Anywho... I love the spaulted maple. You can just see the sandwiched mahogany if you look close.
I'll have a lot of shaping left to do, and I may put an accent band between the cane and the handle and then blend the transition.Anywho... I love the spaulted maple. You can just see the sandwiched mahogany if you look close.
0 x
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.
by the way he treats those who can do nothing for him.
Re: A couple January Projects to Start the New Year...
Looks like it will be a very nice cane.
I have one with a similar shaped handle but it's just a cheap one. Have used it over the years for different injuries and for a couple months after my knee replacement. I think I will eventually need one more to get back up after kneeling before I will need one for walking.
I have one with a similar shaped handle but it's just a cheap one. Have used it over the years for different injuries and for a couple months after my knee replacement. I think I will eventually need one more to get back up after kneeling before I will need one for walking.
0 x
- BrokenolMarine
- Ranch Foreman
- Posts: 5805
- Joined: Sat Nov 26, 2016 8:28 am
- Location: South Central Oklahoma in the mountains
Re: A couple January Projects to Start the New Year...
Dave,
I used a folding CVS cane to give me the general handle shape. My day to day cane is one miss tina bought me at Busch Gardens twenty years ago. It has a composite shaft, brass head, and Marine Corps Logo inset in the brass head. It was made by a Golf Club company. She came across a brand new duplicate in an antique shop ten years later and picked it up as a spare. We keep one in each vehicle.
I used a folding CVS cane to give me the general handle shape. My day to day cane is one miss tina bought me at Busch Gardens twenty years ago. It has a composite shaft, brass head, and Marine Corps Logo inset in the brass head. It was made by a Golf Club company. She came across a brand new duplicate in an antique shop ten years later and picked it up as a spare. We keep one in each vehicle.
0 x
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.
by the way he treats those who can do nothing for him.
- BrokenolMarine
- Ranch Foreman
- Posts: 5805
- Joined: Sat Nov 26, 2016 8:28 am
- Location: South Central Oklahoma in the mountains
Getting a Handle on things...
Pun intended...
I went out this morning and mounted the handle on the shaft... so I could see how much work the blending would be. I used a 3/8 bolt, screwed into the handle then cut off, and a generous amount of Titebond glue. If the glue doesn't hold, I'll unscrew the bolt later and sand the contact surfaces, add a spacer and put epoxy on all of them, clamp and leave them for 24 hours. They won't come loose then. As you can see, there was going to be a bit of work with the spoke shave after mounting. I settled in and got to work. After about an hour, I ended up with this.
I am pretty happy with the blend, now I just need to finish shaping the handle, work on the shaft and decide on the "foot" for the cane.
Then I can decide if I'll let the grain do all the talking, try and carve a bit, or inlay my Wings, a challenge coin, or ... some other trinket to make it special.
I went out this morning and mounted the handle on the shaft... so I could see how much work the blending would be. I used a 3/8 bolt, screwed into the handle then cut off, and a generous amount of Titebond glue. If the glue doesn't hold, I'll unscrew the bolt later and sand the contact surfaces, add a spacer and put epoxy on all of them, clamp and leave them for 24 hours. They won't come loose then. As you can see, there was going to be a bit of work with the spoke shave after mounting. I settled in and got to work. After about an hour, I ended up with this.
I am pretty happy with the blend, now I just need to finish shaping the handle, work on the shaft and decide on the "foot" for the cane.
Then I can decide if I'll let the grain do all the talking, try and carve a bit, or inlay my Wings, a challenge coin, or ... some other trinket to make it special.
Last edited by BrokenolMarine on Sun Jan 14, 2018 11:45 am, edited 1 time in total.
0 x
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.
by the way he treats those who can do nothing for him.
- BrokenolMarine
- Ranch Foreman
- Posts: 5805
- Joined: Sat Nov 26, 2016 8:28 am
- Location: South Central Oklahoma in the mountains
Re: A couple January Projects to Start the New Year...
As always, LOTS of sanding left, and the finish to decide on. Not bad for not having a clue. Tina likes it. Always a good sign.
0 x
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.
by the way he treats those who can do nothing for him.
- BrokenolMarine
- Ranch Foreman
- Posts: 5805
- Joined: Sat Nov 26, 2016 8:28 am
- Location: South Central Oklahoma in the mountains
Getting Close...
Back out in the shop this afternoon to work on the shaping of the handle. I gathered sandpaper in 80, 100, 120 and 220 grit, and worked the handle with long strips cut from each grit. I worked the 80 grit the longest, then the 100 to get the shape I wanted. Then several passes over the handle with the 120 and 220 to get rid of any scratches from the previous grits. We are getting close to the point where we can apply finish and call 'er done.
Wipe down the project with Mineral Spirits and you do a couple things. First you remove all the dust and dirt. Second you highlight any scratches or areas that might need attention BEFORE you apply finish... Lastly, you get a peek at the grain.... then the mineral spirits evaporate and the woods return to the natural state and you can work them as before, using what you have learned. Looks pretty good.
Next task will be cutting the cane to length and shaping the bottom of the shaft to accept a rubber end to act as the foot.
Wipe down the project with Mineral Spirits and you do a couple things. First you remove all the dust and dirt. Second you highlight any scratches or areas that might need attention BEFORE you apply finish... Lastly, you get a peek at the grain.... then the mineral spirits evaporate and the woods return to the natural state and you can work them as before, using what you have learned. Looks pretty good.
Next task will be cutting the cane to length and shaping the bottom of the shaft to accept a rubber end to act as the foot.
2 x
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.
by the way he treats those who can do nothing for him.
Re: A couple January Projects to Start the New Year...
Looks like it has some pretty good heft to it. You could probably use it for self defense in a pinch, I definitely wouldn't want to get whacked with it.
0 x