Spring has sprung. Get out and shoot your Henry
New John Deere for the new place
Re: New John Deere for the new place
Great looking machine. I’ve had two of the X series (gas) and both had/have served me well. Sold the first one because I intended to have a small yard at my current house. Since my wife keeps extending the grass area it became too much for my walk behind so bought an X350. That’s what she gets for keeping the grass areas expanding.
Dave, do you think that with the full time all wheel drive and those good looking tires that you will be able to blow the snow without chains?
Dave, do you think that with the full time all wheel drive and those good looking tires that you will be able to blow the snow without chains?
0 x
- daytime dave
- Administrator / Owner
- Posts: 4844
- Joined: Sun Mar 20, 2016 10:27 pm
- Location: Upstate NY
Re: New John Deere for the new place
I'm going to try it without chains for sure. With the weights and all wheel drive it may work because I'm snow blowing and not plowing. The driveway is not level as it is a hill and curved. It is stone and dirt. I don't think the grade is too bad.
If need be, I have a set of Terra-grip chains. They have rubber slats that go over the tires to protect asphalt driveways. I put them on the spare this winter as I got them on clearance. They were too big for it, but they are the right size for the new machine. If they don't work, real chains will be ordered.
If need be, I have a set of Terra-grip chains. They have rubber slats that go over the tires to protect asphalt driveways. I put them on the spare this winter as I got them on clearance. They were too big for it, but they are the right size for the new machine. If they don't work, real chains will be ordered.
0 x
Some days I'm Andy, most days I'm Barney........
Eaglescout, NRA Life Endowment member, BCCI Life Member
Eaglescout, NRA Life Endowment member, BCCI Life Member
- BrokenolMarine
- Ranch Foreman
- Posts: 5818
- Joined: Sat Nov 26, 2016 8:28 am
- Location: South Central Oklahoma in the mountains
Re: New John Deere for the new place
We had a really nice setup for the Legacy. One year for mother's day, I asked what Tina wanted. Finish Mower: The 72" belly mower was nice, but a PITA to remove and reinstall when you wanted to use the blade, the bushhog, or any of the other implements. So, we removed it and left it off.
She was always working the drive or the path to the barn or coops.
The 4WD and the locking diff made the tractor pretty hard to stick, even in drifts. Then I got the new tires and...
The only thing lacking was the bucket for the front. It was plumbed, it would have been plug and play. Drive up, hook up, and go.
But HARD to find.
Our new tractor here is very nice and below the threshold for the extra EPA bs. 25hp diesel Kubota 2501, with bucket. Does nearly everything you could want, without paying for extra size and power.
We have the bush hog for the pastures, but got a 42" cut zero turn for the yard areas.
She was always working the drive or the path to the barn or coops.
The 4WD and the locking diff made the tractor pretty hard to stick, even in drifts. Then I got the new tires and...
The only thing lacking was the bucket for the front. It was plumbed, it would have been plug and play. Drive up, hook up, and go.
But HARD to find.
Our new tractor here is very nice and below the threshold for the extra EPA bs. 25hp diesel Kubota 2501, with bucket. Does nearly everything you could want, without paying for extra size and power.
We have the bush hog for the pastures, but got a 42" cut zero turn for the yard areas.
1 x
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.
by the way he treats those who can do nothing for him.
Re: New John Deere for the new place
I was going to buy a bigger tractor for our new place, but put off buying the new place as all the panic buyers have driven real estate prices way past reasonable here. Acreages are going for $400,000 or more over asking prices, which are already at least $100,000 over what they should be. I will not get into a pissing contest for property. There is almost nothing listed now either, so if you find something you like, it will have multiple cash offers on it buy the end of the first day. It’s madness.
So, instead of buying a bigger rig, I just treated myself to a new mower, and have a 48” blade for it already. I found a nice old guy selling a set of front and rear chains that will fit, which when I called he said I could just have them that will help a bunch with the snow. 22hp with a few bells and whistles, but still very basic. It’s a nice rig, but needs a few tweaks like disabling the seat switch etc so I can open gates etc without shutting it off. I can’t even shuffle in my seat after 30 mins without the motor starting to shut off.
A couple of photos of the stress test for the 1 ton:
So, instead of buying a bigger rig, I just treated myself to a new mower, and have a 48” blade for it already. I found a nice old guy selling a set of front and rear chains that will fit, which when I called he said I could just have them that will help a bunch with the snow. 22hp with a few bells and whistles, but still very basic. It’s a nice rig, but needs a few tweaks like disabling the seat switch etc so I can open gates etc without shutting it off. I can’t even shuffle in my seat after 30 mins without the motor starting to shut off.
A couple of photos of the stress test for the 1 ton:
- Attachments
-
- 315F15D4-71B3-4628-B5D3-07FFB7943087.jpeg (347.9 KiB) Viewed 3140 times
-
- 2BC97A61-9487-4605-8CC8-67AE9A6F1BB6.jpeg (389.16 KiB) Viewed 3140 times
0 x
SGC .22 LR Stripped and oiled up
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF
Re: New John Deere for the new place
Oh, and as you can see RR, it has a cup holder to keep the beer in place. I mowed 1.5 acres yesterday and it is so much nicer than the old dinosaur I was nursing along. It turns so quick it’s almost a zero turn in comparison.
0 x
SGC .22 LR Stripped and oiled up
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF
Re: New John Deere for the new place
First of all I hope the Ram is getting a good rest as well as that dual axle trailer after hauling that load. Good think the Highway Patrol (Mounties?) didn’t pull you over for an excessive load. That’s good looking John Deere.
Those acreage prices are crazy. It’s bad around here (Eastern Washington St.) but not as bad as what you are experiencing. Are you thinking that folks from the Seattle area are driving the prices up? Can’t say I blame them wanting to get away from the blight that that beautiful city has been experiencing.
Those acreage prices are crazy. It’s bad around here (Eastern Washington St.) but not as bad as what you are experiencing. Are you thinking that folks from the Seattle area are driving the prices up? Can’t say I blame them wanting to get away from the blight that that beautiful city has been experiencing.
0 x
Re: New John Deere for the new place
I just got back from turkey hunting just literally a stones throw north of the border on the Pend Orielle River which as I’m sure you know is just a short drive due north from you by Leadpoint/Metaline Falls. We looked at a place right at the top of the 395 again only 200 yards north of the border. It was only about $200,000 overpriced. Our issue is the Vancouver people mainly, and the new trend of working from home, which allows them to move further from the big city. I have been looking around most of southern BC (BC = Bring Cash these days), and it’s the same everywhere. I think we are going to wait a bit and let the madness pass. Maybe late fall will see some sanity or more options open up.
0 x
SGC .22 LR Stripped and oiled up
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF
- daytime dave
- Administrator / Owner
- Posts: 4844
- Joined: Sun Mar 20, 2016 10:27 pm
- Location: Upstate NY
Re: New John Deere for the new place
Marine, the Simplicity is very similar to the 758 in looks and size. I could have picked up a used one with decent hours, a bucket, mower, 3pt etc, diesel even, but I would have had to pay cash. The JD is 0% financing. I already have three compact tractors, so this was a nice purchase for me. Your Kubota looks like it fills the bill nicely.
Redthies, we are not exempt from the over priced acerage here, but I paid more than asking by a lot. However, I came in well under the banks appraiser. The interest rate was too good to not finance. I love your new mower and I'm glad it worked well for you.
I mowed the new place for the first time today. The x758 mowed beautifully. Where it could not go, I used a newly purchased DeWalt 20v self propelled mower. The x758 took an hour to do a good job. The DeWalt took about a half and hour to finish up what was left. All in all it was beautiful afterwards.
Redthies, we are not exempt from the over priced acerage here, but I paid more than asking by a lot. However, I came in well under the banks appraiser. The interest rate was too good to not finance. I love your new mower and I'm glad it worked well for you.
I mowed the new place for the first time today. The x758 mowed beautifully. Where it could not go, I used a newly purchased DeWalt 20v self propelled mower. The x758 took an hour to do a good job. The DeWalt took about a half and hour to finish up what was left. All in all it was beautiful afterwards.
1 x
Some days I'm Andy, most days I'm Barney........
Eaglescout, NRA Life Endowment member, BCCI Life Member
Eaglescout, NRA Life Endowment member, BCCI Life Member
Re: New John Deere for the new place
Dave, beautiful rig. Nothing Runs Like a Deere and a real JD garden tractor is made in Horicon, WI.
0 x
Henry Hoo1T, Hoo9
Re: New John Deere for the new place
Dave, show us a photo of the tractor without the top (assuming you will have it off for summer) and in it’s natural element!
I found a JD 10P trailer down the street today for $200 so I grabbed it. Can’t wait to fill it with crap...
Marine: I’m a little jealous of your Kubota!
I found a JD 10P trailer down the street today for $200 so I grabbed it. Can’t wait to fill it with crap...
Marine: I’m a little jealous of your Kubota!
1 x
SGC .22 LR Stripped and oiled up
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF