Spring has sprung. Get out and shoot your Henry
Can you remove the caliber designation from the magazine tube
-
- Tenderfoot
- Posts: 9
- Joined: Sat Feb 03, 2018 10:18 pm
Can you remove the caliber designation from the magazine tube
I'd like to remove the red painted .357 from my magazine tube, without damaging the finish. Has anyone successfully done this?
Thank you in advance.
Thank you in advance.
0 x
- CT_Shooter
- Administrator emeritus
- Posts: 5156
- Joined: Mon Mar 21, 2016 8:42 am
- Location: Connecticut
Re: Can you remove the caliber designation from the magazine tube
I own a Henry H006M (.357 Brass Big Boy rifle), but the magazine tube has no such marking. I did not know the carbine was different.harveymushman wrote:I'd like to remove the red painted .357 from my magazine tube, without damaging the finish. Has anyone successfully done this?
0 x
H006M Big Boy Brass .357 - H001 Classic .22LR - Uberti / Taylors & Co. SmokeWagon .357 5.5" - Uberti / Taylors & Co. RanchHand .22LR 5.5"
Re: Can you remove the caliber designation from the magazine tube
Now to send you Greetings as a new Forum member, Harvey. Glad you joined and brought another .357 Henry on board, too!
Enjoy your time here....'tis a good group on the HRF.
PT7
harveymushman wrote:I'd like to remove the red painted .357 from my magazine tube, without damaging the finish. Has anyone successfully done this?
Thank you in advance.
You do not have the required permissions to view the files attached to this post.
1 x
~Пока~
Re: Can you remove the caliber designation from the magazine tube
Ditto to PT7. My 357 carbine has no markings as described. Is it on the blued portion? Or the brass? Not sure of remover, nail polish remover?
Good luck, someone here will come through for you. Welcome to the forum.
Good luck, someone here will come through for you. Welcome to the forum.
0 x
Remember, it's not how many guns you have. It's how many bullets you have.
Re: Can you remove the caliber designation from the magazine tube
.
post a picture please.
post a picture please.
harveymushman wrote:I'd like to remove the red painted .357 from my magazine tube, without damaging the finish. Has anyone successfully done this?
Thank you in advance.
0 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234
- RetiredSeabee
- Administrator
- Posts: 2285
- Joined: Mon Mar 21, 2016 5:04 pm
- Location: Harrisburg, North Carolina
Re: Can you remove the caliber designation from the magazine tube
I think I would just paint over it with black.
0 x
Load on Sunday and Shoot all Week.......okay it's a Mare's Leg I will reload on Wednesday.
Re: Can you remove the caliber designation from the magazine tube
Aure you referring to the inner tube?
0 x
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357
-
- Tenderfoot
- Posts: 9
- Joined: Sat Feb 03, 2018 10:18 pm
Re: Can you remove the caliber designation from the magazine tube
How do I post an image from my hard drive on this forum?
0 x
Re: Can you remove the caliber designation from the magazine tube
Holding a cotton ball with Hoppe's #9 solvent for a few minutes might soften it enough to be able to scrape if off with a finger nail or pop cycle stick.harveymushman wrote:I'd like to remove the red painted .357 from my magazine tube, without damaging the finish. Has anyone successfully done this?
Thank you in advance.
Judicious use of a heat gun might soften the paint too, but use a stick to scrape it not your finger
0 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234
-
- Tenderfoot
- Posts: 9
- Joined: Sat Feb 03, 2018 10:18 pm
Re: Can you remove the caliber designation from the magazine tube
It's on the outside of the tube. Every Henry in the store had it on them. Mine's in red, and I seem to recall the .44 mags were in yellow.ESquared wrote:Aure you referring to the inner tube?
0 x