Spring has sprung. Get out and shoot your Henry
Henry H015 trigger tune single shot
Re: Henry Single Shot Trigger Job H015
Bear
I had read this also on another forum where one member claimed that the bolt was pushing the spring in farther creating this. He never did like you have and posted back with what he did. This is a good idea and more food for thought for some who have found that changing the spring to a lighter one didn't work.
I had read this also on another forum where one member claimed that the bolt was pushing the spring in farther creating this. He never did like you have and posted back with what he did. This is a good idea and more food for thought for some who have found that changing the spring to a lighter one didn't work.
1 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
Re: Henry H015 trigger tune single shot
Great job. Well done!
I have the 30-30 single shot and ended up letting my gunsmith work on the trigger. The end result was a 5 lb pull with the stock hammer spring. There’s little to no slop, pretty much wall - bang. I plan to finish dialing mine in for deer season this weekend.
Enjoy those single shots and be safe. Thanks for sharing!
I have the 30-30 single shot and ended up letting my gunsmith work on the trigger. The end result was a 5 lb pull with the stock hammer spring. There’s little to no slop, pretty much wall - bang. I plan to finish dialing mine in for deer season this weekend.
Enjoy those single shots and be safe. Thanks for sharing!
0 x
Henry Small Game Carbine 22 LR
Henry Single Shot 30-30
Henry Single Shot 30-30
-
- Cattle Driver
- Posts: 725
- Joined: Sun Jul 24, 2016 6:53 pm
- Location: Shenandoah Valley, VA
Re: Henry H015 trigger tune single shot
Great post - excellent info for all us Henry "Single" owners.
0 x
US Submarine Service 1976-2006
Henry H001TLP,H001TLB,H003T,H004,H006R,H006M,H012R,H012AW,H012MRCC,H010CC,H015-357,H015-44,H015-4570
Winchester 9422,1873,1885,1886,1892
Marlin 39A,AS,CL,D,M,Mountie,TDS,1897CB,Texan,1894CB,1895CBA,1895SBL
Ruger #1 44Mag
Henry H001TLP,H001TLB,H003T,H004,H006R,H006M,H012R,H012AW,H012MRCC,H010CC,H015-357,H015-44,H015-4570
Winchester 9422,1873,1885,1886,1892
Marlin 39A,AS,CL,D,M,Mountie,TDS,1897CB,Texan,1894CB,1895CBA,1895SBL
Ruger #1 44Mag
Re: Henry H015 trigger tune single shot
Great post. Thanks for the info. I was going to take mine apart this weekend just to polish up the wood, but now it looks like I have a few other things to check out as well .
0 x
Re: Henry H015 trigger tune single shot
.
Great write up! Love the mechanical explanations with pictures.
Great write up! Love the mechanical explanations with pictures.
0 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234
-
- Tenderfoot
- Posts: 17
- Joined: Wed Sep 11, 2019 10:41 pm
Re: Henry Single Shot Trigger Job H015
Skip
Last edited by Bear-of-Grayling on Fri Apr 17, 2020 2:17 pm, edited 1 time in total.
0 x
-
- Tenderfoot
- Posts: 17
- Joined: Wed Sep 11, 2019 10:41 pm
Re: Henry Single Shot Trigger Job H015
I added a 7/16 spacer to the 308 and it brought the trigger down to 3 1/2 lbs. I like it. However, the 223 is now again a full pound heavier. I disassembled the 223 and polished the trigger and sear again but this time used 600 grit then 1500 grit and finally polished with the Dremel. I am very happy to report both guns weigh in with a 3 1/2 trigger pull with the factory springs. I will post my shooting results when I return from the range. Probably in a week. To hot here at 95 with 100% humidity.
0 x
Re: Henry Single Shot Trigger Job H015
Welcome from Wickiup Junction, Oregon!
Enjoyed your post & pics.
Like you I do all my own gun repairs & mods and always enjoy seeing others and hearing the success stories as well!
Enjoyed your post & pics.
Like you I do all my own gun repairs & mods and always enjoy seeing others and hearing the success stories as well!
1 x
Re: Henry Single Shot Trigger Job H015
I will be awaiting your results Bear and thanks for taking us along for the ride. I have enjoyed watching your progress.
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
-
- Tenderfoot
- Posts: 17
- Joined: Wed Sep 11, 2019 10:41 pm
Re: Henry Single Shot Trigger Job H015
Skip
Last edited by Bear-of-Grayling on Fri Apr 17, 2020 2:19 pm, edited 3 times in total.
0 x