Spring has sprung. Get out and shoot your Henry
Trigger mod question.
Trigger mod question.
I bought myself a Henry Single shot rifle in 308 win for deer hunting. I was aware of the complaints about the strong hammer spring and trigger pull issue. And read on another forum as to the fix. I have a Grainger account and tried to order the spring. The sales rep told me the part# was no longer available. I took the smaller inner spring out and that helped but I know it could be better. I'm hoping that because the springs came in a bag of 10, that somebody has 9 springs left and is willing to sell me one of them. I have done some research and using the specs off the Grainger site have come come up with a very close match but not the same spring. Can anyone help ?
0 x
- CT_Shooter
- Administrator emeritus
- Posts: 5156
- Joined: Mon Mar 21, 2016 8:42 am
- Location: Connecticut
Re: Trigger mod question.
BigAl52 might be able to help.
http://henryrifleforums.com/viewtopic.p ... 886#p80687
http://henryrifleforums.com/viewtopic.p ... 886#p80687
X-Hunter wrote:I bought myself a Henry Single shot rifle in 308 win for deer hunting. I was aware of the complaints about the strong hammer spring and trigger pull issue. And read on another forum as to the fix. I have a Grainger account and tried to order the spring. The sales rep told me the part# was no longer available. I took the smaller inner spring out and that helped but I know it could be better. I'm hoping that because the springs came in a bag of 10, that somebody has 9 springs left and is willing to sell me one of them. I have done some research and using the specs off the Grainger site have come come up with a very close match but not the same spring. Can anyone help ?
0 x
H006M Big Boy Brass .357 - H001 Classic .22LR - Uberti / Taylors & Co. SmokeWagon .357 5.5" - Uberti / Taylors & Co. RanchHand .22LR 5.5"
-
- Cattle Driver
- Posts: 725
- Joined: Sun Jul 24, 2016 6:53 pm
- Location: Shenandoah Valley, VA
Re: Trigger mod question.
I've got a couple of springs left over from modding three single-shots - send me a PM with your address and I'll send you one.
1 x
US Submarine Service 1976-2006
Henry H001TLP,H001TLB,H003T,H004,H006R,H006M,H012R,H012AW,H012MRCC,H010CC,H015-357,H015-44,H015-4570
Winchester 9422,1873,1885,1886,1892
Marlin 39A,AS,CL,D,M,Mountie,TDS,1897CB,Texan,1894CB,1895CBA,1895SBL
Ruger #1 44Mag
Henry H001TLP,H001TLB,H003T,H004,H006R,H006M,H012R,H012AW,H012MRCC,H010CC,H015-357,H015-44,H015-4570
Winchester 9422,1873,1885,1886,1892
Marlin 39A,AS,CL,D,M,Mountie,TDS,1897CB,Texan,1894CB,1895CBA,1895SBL
Ruger #1 44Mag
Re: Trigger mod question.
Awesome, Not looking for a free bee, I would be happy to buy it. Just tried to send you a PM. I have never done it before so I may have flubbed it up. Please let me know if you received it. Thank you again.
0 x
-
- Cattle Driver
- Posts: 725
- Joined: Sun Jul 24, 2016 6:53 pm
- Location: Shenandoah Valley, VA
Re: Trigger mod question.
Hey X - that's a no-joy on the PM. Send it to my e-mail at tractortad@gmail.com
0 x
US Submarine Service 1976-2006
Henry H001TLP,H001TLB,H003T,H004,H006R,H006M,H012R,H012AW,H012MRCC,H010CC,H015-357,H015-44,H015-4570
Winchester 9422,1873,1885,1886,1892
Marlin 39A,AS,CL,D,M,Mountie,TDS,1897CB,Texan,1894CB,1895CBA,1895SBL
Ruger #1 44Mag
Henry H001TLP,H001TLB,H003T,H004,H006R,H006M,H012R,H012AW,H012MRCC,H010CC,H015-357,H015-44,H015-4570
Winchester 9422,1873,1885,1886,1892
Marlin 39A,AS,CL,D,M,Mountie,TDS,1897CB,Texan,1894CB,1895CBA,1895SBL
Ruger #1 44Mag
Re: Trigger mod question.
I also sent XHunter a PM but I see he is having issues with those. I figured Tad would also come in here to help. Im willing to also help just so you know Xhunter.
1 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
Re: Trigger mod question.
I see that and I really do appreciate the help. I'll figure this thing out. I'm in a couple other forums and the format looks similar but I have never sent a PM. But thanks again for the help. I am mounting a scope and i used the ambidextrous hammer extender and it doesn't leave enough tab sticking out to get a good thumb bite on it. I bought a one piece base ring that was made for the Handy rifle. Good product but as much as I hate to raise the scope any higher than necessary. I have to get it up away from the extension enough. I returned the mount and ordered the rail so I can use high bases and see how that works. How has everyone been mounting scopes on these rifles ? The spring mod will help reduce the force needed to cock it but it's very important to me to get a good thumb hold on that hammer. need to be able to lower it safely too.
0 x
Re: Trigger mod question.
Here is what I use maybe this will help. I had the quick disconnect rings already so I figured why not use them.
2 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
-
- Cattle Driver
- Posts: 725
- Joined: Sun Jul 24, 2016 6:53 pm
- Location: Shenandoah Valley, VA
Re: Trigger mod question.
We might mount a scope on one of ours and I think we'll try the Talley one-piece mount that Henry sells for single-shots - priced about $40.X-Hunter wrote: How has everyone been mounting scopes on these rifles ? The spring mod will help reduce the force needed to cock it but it's very important to me to get a good thumb hold on that hammer. need to be able to lower it safely too.
0 x
US Submarine Service 1976-2006
Henry H001TLP,H001TLB,H003T,H004,H006R,H006M,H012R,H012AW,H012MRCC,H010CC,H015-357,H015-44,H015-4570
Winchester 9422,1873,1885,1886,1892
Marlin 39A,AS,CL,D,M,Mountie,TDS,1897CB,Texan,1894CB,1895CBA,1895SBL
Ruger #1 44Mag
Henry H001TLP,H001TLB,H003T,H004,H006R,H006M,H012R,H012AW,H012MRCC,H010CC,H015-357,H015-44,H015-4570
Winchester 9422,1873,1885,1886,1892
Marlin 39A,AS,CL,D,M,Mountie,TDS,1897CB,Texan,1894CB,1895CBA,1895SBL
Ruger #1 44Mag
Re: Trigger mod question.
I put a scope on mine just to try out. Once I find a load I like I may well take it off for a red dot. Just like the quickness of the red dot not to mention its lighter. I realize that the scope has its place on certain calibers and for hunting. For me my 357 was never intended to hunt with only clay pigeon bustin on the dirt banks. Maybe an occasional swingin bowlin pin to.
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55