Spring has sprung. Get out and shoot your Henry
New BB brass in 357, new member
-
- Tenderfoot
- Posts: 4
- Joined: Mon May 21, 2018 5:54 pm
New BB brass in 357, new member
Thought I would say hello here. My brother gave me a brass 357 carbine for my 62 birthday. It's my first ever lever gun and I'm still learning to shoot it.
He bought a 41 Mag carbine to match his S&W pistol so I got him a fancy wood stock upgrade. It's been a Henry kind of year around here. Guess I'm going to get some skinner sights for us. I've looked at many kinds of sights and tried a scope but Skinner sights seem to best fit the gun. Any pros or cons?
I's finally warming up here in central Montana so I've been doing more shooting. We had lots of practice last weekend until my brother blasted the chronograph (he used his 92FS). I kept the front plate as a souvenir. He bucked up and bought us a new one. It was a good day.
He bought a 41 Mag carbine to match his S&W pistol so I got him a fancy wood stock upgrade. It's been a Henry kind of year around here. Guess I'm going to get some skinner sights for us. I've looked at many kinds of sights and tried a scope but Skinner sights seem to best fit the gun. Any pros or cons?
I's finally warming up here in central Montana so I've been doing more shooting. We had lots of practice last weekend until my brother blasted the chronograph (he used his 92FS). I kept the front plate as a souvenir. He bucked up and bought us a new one. It was a good day.
1 x
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19269
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: New BB brass in 357, new member
welcome indeed .... thanks for adding your Henry to our community's total .... don't be too tough on your brother, shooting a Chrony can happen to anyone .. .. trust me on that one .... our Henry 357 is one of our favorites, you'll find a good deal of info on them here
0 x
Re: New BB brass in 357, new member
What a special 62nd birthday gift....a .357 Magnum Henry Carbine. Congrats!! I just got the .357 BBS Carbine this month myself. I've found mine is a real straight-shooter, and very easy to handle. It's also quite "easy-on-the-eyes." I'm positive you will enjoy yours. BTW, I've put a receiver-mounted Skinner Express on my Carbine, and it works well for me.
As JEBar noted, there is quite a lot of info on this caliber Henry rifle posted on our Forum. Just search for them and you'll have some good reads ahead!
PT7
greenlaser wrote:Thought I would say hello here. My brother gave me a brass 357 carbine for my 62 birthday. It's my first ever lever gun and I'm still learning to shoot it.
He bought a 41 Mag carbine to match his S&W pistol so I got him a fancy wood stock upgrade. It's been a Henry kind of year around here. Guess I'm going to get some skinner sights for us. I've looked at many kinds of sights and tried a scope but Skinner sights seem to best fit the gun. Any pros or cons?
I's finally warming up here in central Montana so I've been doing more shooting. We had lots of practice last weekend until my brother blasted the chronograph (he used his 92FS). I kept the front plate as a souvenir. He bucked up and bought us a new one. It was a good day.
You do not have the required permissions to view the files attached to this post.
0 x
~Пока~
- CT_Shooter
- Administrator emeritus
- Posts: 5152
- Joined: Mon Mar 21, 2016 8:42 am
- Location: Connecticut
Re: New BB brass in 357, new member
Congratulations on your first Henry. That's a great rifle and I'm sure you're going to enjoy it. I put a Skinner Express on my own BBB .357 and it is a perfect match. Welcome to the forum.
0 x
H006M Big Boy Brass .357 - H001 Classic .22LR - Uberti / Taylors & Co. SmokeWagon .357 5.5" - Uberti / Taylors & Co. RanchHand .22LR 5.5"
Re: New BB brass in 357, new member
The Skinner appears to be a good sight but don't rule out a Williams 336 for it. Considerably less money.Any pros or cons?
You do not have the required permissions to view the files attached to this post.
0 x
Re: New BB brass in 357, new member
Welcome to the forum. Nice gift from a brother for sure. Tell you brother about the forum also if you havent already.
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
Re: New BB brass in 357, new member
Welcome!
0 x
Vietnam, Cambodia, DMZ
101st Airborne, Recon. ( Where in the heck are we?)
25th Inf. Div.2/22 Inf. Reg.(mech.)
Sgt., U.S. Army, Sniper
S&W Model 67
Uberti 1851 Navy Conv.
Uberti 1873 Bisley
Henry .357 Carbine CCH
Henry SGR .22
Taurus 856
101st Airborne, Recon. ( Where in the heck are we?)
25th Inf. Div.2/22 Inf. Reg.(mech.)
Sgt., U.S. Army, Sniper
S&W Model 67
Uberti 1851 Navy Conv.
Uberti 1873 Bisley
Henry .357 Carbine CCH
Henry SGR .22
Taurus 856
- Ojaileveraction
- Cowboy
- Posts: 1292
- Joined: Tue Apr 04, 2017 11:49 pm
Re: New BB brass in 357, new member
That is a Williams WGRS sightMistered wrote:The Skinner appears to be a good sight but don't rule out a Williams 336 for it. Considerably less money.Any pros or cons?
IMG_0954[1].JPG
The Williams 336 requires significant modification to fit the Brass Big Boy.
0 x
Pax at Justitia
- Shakey Jake
- Drover
- Posts: 4285
- Joined: Wed Aug 16, 2017 11:10 am
- Location: Sugar Land, TX
- Contact:
Re: New BB brass in 357, new member
Two things: 1) you got a hellava' brother and 2) contrats on the rifle.
0 x
-
- Tenderfoot
- Posts: 4
- Joined: Mon May 21, 2018 5:54 pm
Re: New BB brass in 357, new member
Thanks for the congrats guys. There is a lot of good reading on this site and I have been busy reading.
I am really interested interested in the Williams FP-336. None of these manufacturers give dimensions I need. Will this fit.
The last two holes on the scope base are 1/2 inch apart. Has anyone used this sight on H006. I would probably put on a globe front sight too. Yah he's one hellava bro. i'll try and post a pic of his fancy wood i got from Henry. It's nice.
I am really interested interested in the Williams FP-336. None of these manufacturers give dimensions I need. Will this fit.
The last two holes on the scope base are 1/2 inch apart. Has anyone used this sight on H006. I would probably put on a globe front sight too. Yah he's one hellava bro. i'll try and post a pic of his fancy wood i got from Henry. It's nice.
0 x