Spring has sprung. Get out and shoot your Henry
Check your screws
Check your screws
3 x
Bellum Omnium Contra Omnes is rapidly becoming a reality (11/2023). Para Bellum.
- RanchRoper
- Forum Ambassador
- Posts: 12692
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta
Re: Check your screws
Good info, thanks. My wife thinks I have a screw loose.
1 x
1860 Colt SA Richards Conversion Revolver .45C
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
Re: Check your screws
Just one?
1 x
Remember, it's not how many guns you have. It's how many bullets you have.
Re: Check your screws
I just noticed my receiver mounted Skinner peep was loose today and had to tighten it up. I was wondering if I needed some blue loctite? Any advice?
0 x
Re: Check your screws
.
I use blue loctite.
I use blue loctite.
0 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234
- CT_Shooter
- Administrator emeritus
- Posts: 5156
- Joined: Mon Mar 21, 2016 8:42 am
- Location: Connecticut
Re: Check your screws
In the movies, you never see a cowboy pausing a gunfight to tighten the screws on his six gun , but the screws on my Uberti/Taylors SmokeWagon .357 SAA (especially the ejector rod screw) still loosen after a couple hundred rounds, even after a proper application of Blue Loctite. I'll give Purple a try.
0 x
H006M Big Boy Brass .357 - H001 Classic .22LR - Uberti / Taylors & Co. SmokeWagon .357 5.5" - Uberti / Taylors & Co. RanchHand .22LR 5.5"
Re: Check your screws
.
purple is less sticky than blue.
purple is less sticky than blue.
CT_Shooter wrote: ↑Mon Oct 21, 2019 7:56 amIn the movies, you never see a cowboy pausing a gunfight to tighten the screws on his six gun , but the screws on my Uberti/Taylors SmokeWagon .357 SAA (especially the ejector rod screw) still loosen after a couple hundred rounds, even after a proper application of Blue Loctite. I'll give Purple a try.
0 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234
Re: Check your screws
These are the Loctite differences. Avoid red, it's fairly permanent.
Green is for electronic connections.
Green is for electronic connections.
You do not have the required permissions to view the files attached to this post.
2 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234