Spring has sprung. Get out and shoot your Henry

screwdrivers

Tell us how you do it
Post Reply
User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 19272
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: screwdrivers

Post by JEBar » Sun Nov 04, 2018 11:21 am

this thread goes back a ways, I'm looking for recommendations from folks who have used any of the brands covered in this thread or others that haven't .... specifically what I'm looking for a set with well ground, strong, tips
0 x

User avatar
BigAl52
Forum Ambassador
Posts: 13640
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: screwdrivers

Post by BigAl52 » Sun Nov 04, 2018 11:34 am

https://www.amazon.com/Weaver-Gunsmith- ... r+tool+kit I have this set Jim and like it. But Henry sells some also. If I didnt already have these I might buy the Henry set. Al
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 19272
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: screwdrivers

Post by JEBar » Sun Nov 04, 2018 11:39 am

I was just looking at that set .... also some by Wheeler .... my hunch is the tips for most all of them are made in the same factory in China .... sadly, I haven't found any that can stand up to much pressure
0 x

User avatar
BigAl52
Forum Ambassador
Posts: 13640
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: screwdrivers

Post by BigAl52 » Sun Nov 04, 2018 11:54 am

https://henrypride.com/collections/acce ... 8142713484

Here you go Jim made in the USA. I get the china stuff I hate it also. I really do try to watch it especially for my Dogs. I wont buy any treats for them Made in China. Those people could care less about the quality of the treats for the animals.
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 19272
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: screwdrivers

Post by JEBar » Sun Nov 04, 2018 12:48 pm

I've looked at set Henry sells many times .... $ 112.95 .. :shock: .. always gets my attention ....
1 x

User avatar
BigAl52
Forum Ambassador
Posts: 13640
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: screwdrivers

Post by BigAl52 » Sun Nov 04, 2018 1:24 pm

Oh come Jim. It you want to see sticker shock get on the snap on truck. Now that will get your attention
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 19272
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: screwdrivers

Post by JEBar » Sun Nov 04, 2018 2:01 pm

have seen their trucks but never bought anything from them .... from your comment, doubt I ever will .. :?
0 x

User avatar
Lyman
Cowhand
Posts: 236
Joined: Thu Jun 21, 2018 8:59 pm
Location: Lakeside CA
United States of America

Re: screwdrivers

Post by Lyman » Sun Nov 04, 2018 4:37 pm

You can find the Grace screwdrivers on Amazon much cheaper. I happen to use a multi bit screwdriver that came with a Harley Touring Bike that I bought many years ago. The Hollow ground bits work great on my guns. Any Hollow Ground driver will work better than any Tapered screwdriver.
Can't blame you one bit for wanting an American made set. I know that's what I prefer.
0 x
NRA & 2nd Amendment Supporter. Lyman is my middle name.

User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 19272
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: screwdrivers

Post by JEBar » Sun Nov 04, 2018 5:41 pm

one of the sets I'm looking at is the Grace USA - Gunsmith 24 Bit Mag Tip Screwdriver Set ====> https://www.amazon.com/Grace-USA-Gunsmi ... driver+set

from what I've seen, Grace doesn't offer many bit driver sets
3 x

User avatar
Lyman
Cowhand
Posts: 236
Joined: Thu Jun 21, 2018 8:59 pm
Location: Lakeside CA
United States of America

Re: screwdrivers

Post by Lyman » Sun Nov 04, 2018 6:10 pm

That looks like a nice set. If I didnt already have a ton of them I'd buy it myself.
0 x
NRA & 2nd Amendment Supporter. Lyman is my middle name.

Post Reply