Spring has sprung. Get out and shoot your Henry
screwdrivers
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19337
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: screwdrivers
this thread goes back a ways, I'm looking for recommendations from folks who have used any of the brands covered in this thread or others that haven't .... specifically what I'm looking for a set with well ground, strong, tips
0 x
Re: screwdrivers
https://www.amazon.com/Weaver-Gunsmith- ... r+tool+kit I have this set Jim and like it. But Henry sells some also. If I didnt already have these I might buy the Henry set. Al
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19337
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: screwdrivers
I was just looking at that set .... also some by Wheeler .... my hunch is the tips for most all of them are made in the same factory in China .... sadly, I haven't found any that can stand up to much pressure
0 x
Re: screwdrivers
https://henrypride.com/collections/acce ... 8142713484
Here you go Jim made in the USA. I get the china stuff I hate it also. I really do try to watch it especially for my Dogs. I wont buy any treats for them Made in China. Those people could care less about the quality of the treats for the animals.
Here you go Jim made in the USA. I get the china stuff I hate it also. I really do try to watch it especially for my Dogs. I wont buy any treats for them Made in China. Those people could care less about the quality of the treats for the animals.
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19337
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: screwdrivers
I've looked at set Henry sells many times .... $ 112.95 .. .. always gets my attention ....
1 x
Re: screwdrivers
Oh come Jim. It you want to see sticker shock get on the snap on truck. Now that will get your attention
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19337
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: screwdrivers
have seen their trucks but never bought anything from them .... from your comment, doubt I ever will ..
0 x
Re: screwdrivers
You can find the Grace screwdrivers on Amazon much cheaper. I happen to use a multi bit screwdriver that came with a Harley Touring Bike that I bought many years ago. The Hollow ground bits work great on my guns. Any Hollow Ground driver will work better than any Tapered screwdriver.
Can't blame you one bit for wanting an American made set. I know that's what I prefer.
Can't blame you one bit for wanting an American made set. I know that's what I prefer.
0 x
NRA & 2nd Amendment Supporter. Lyman is my middle name.
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19337
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: screwdrivers
one of the sets I'm looking at is the Grace USA - Gunsmith 24 Bit Mag Tip Screwdriver Set ====> https://www.amazon.com/Grace-USA-Gunsmi ... driver+set
from what I've seen, Grace doesn't offer many bit driver sets
from what I've seen, Grace doesn't offer many bit driver sets
3 x
Re: screwdrivers
That looks like a nice set. If I didnt already have a ton of them I'd buy it myself.
0 x
NRA & 2nd Amendment Supporter. Lyman is my middle name.