Thanks. I contacted Henry and they replied the next day. The torque is 20 inch pounds for a brass receiver. Thanks again guys.JEBar wrote: ↑Mon Jun 24, 2019 9:42 pmfirst, welcome to our forum, delighted to have you join us ..... some of our folks may well know the specs and will be along shortly to provide them .... the most authoritative source for such info would be Henry customer support .... give them a call or send them an email and you'll find they are great to work with .... please take a look at our How Many ? thread (link below) and add your Henry to our community's total
http://henryrifleforums.com/viewtopic.p ... 39#p100039
Spring has sprung. Get out and shoot your Henry
Torque Question
-
- Tenderfoot
- Posts: 3
- Joined: Wed Apr 17, 2019 1:09 am
Re: Torque Question
2 x
-
- Tenderfoot
- Posts: 3
- Joined: Wed Apr 17, 2019 1:09 am
Re: Torque Question
That's what i thought too, but no,it gives the torque value for the rings,but not the base. It just says to check with the gun company for the base torque.Mags wrote: ↑Tue Jun 25, 2019 12:10 pm.
Welcome to the forum from the TV, Oregon.
The torque spec should have been included on a small piece of installation instruction paper inside the blister package the base came in. It's sandwiched between the front and back of the pretty paper covers inside the blister package. If you just cut the base out of blister package then you may have missed finding the installation sheet.SoonerShooter wrote: ↑Mon Jun 24, 2019 8:57 pmI have a Big Boy .357 with the brass receiver. I bought the Henry Ring and Base set for it. I know what the torque is for the rings,but I can't find the torque for the 3 screws in the base. I need to know so I don't strip out the receiver. Thanks.
1 x
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19339
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: Torque Question
not surprised in the least by your reported contact with Henry Customer Service .... they are a top tier company .... glad you now have authoritative infoSoonerShooter wrote: ↑Wed Jun 26, 2019 9:31 pmThanks. I contacted Henry and they replied the next day. The torque is 20 inch pounds for a brass receiver. Thanks again guys.
1 x
Re: Torque Question
.
hah! very good. Thanks for sharing that information.
hah! very good. Thanks for sharing that information.
SoonerShooter wrote: ↑Wed Jun 26, 2019 9:31 pm...s. I contacted Henry and they replied the next day. The torque is 20 inch pounds for a brass receiver. Thanks again guys.
0 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234