Spring has sprung. Get out and shoot your Henry

Tech sights on H001

Post Reply
chrisb
Tenderfoot
Posts: 4
Joined: Wed Aug 02, 2017 2:58 pm
Great Britain

Tech sights on H001

Post by chrisb » Thu Dec 14, 2017 7:05 am

Hi from England,
I recently purchased a Henry H001. I already had a Rossi 1892 .357 with a Marble Arms tang sight which I love.
Looked for a cheap simple conversion to a peep sight for the Henry.
I had in my box of odds and sods a new dovetailed front fibre sight for a Gamo IGT Whisper air rifle and a rear Tech sight
for a Ruger 10/22.
Filed the blade off the Henry front sight so that top of sight was flat. Filed the dovetail off the Gamo sight so that the base was flat.
Applied two part Araldite adhesive. Applied pressure for about 2 hours.
At 20 yards range the Tech sight can be raised/lowered so point of aim = point of impact or with 6 o'clock hold poa = 4" below poi.
There is still some adjustment left on the Tech sight.
Hope this might help a fellow shooter.
ChrisB
1 x

Post Reply