Spring has sprung. Get out and shoot your Henry

Rings for Skinner Express w/ Scope Mount on H009

Post Reply
galen.turner
Tenderfoot
Posts: 4
Joined: Tue Feb 05, 2019 10:56 am
United States of America

Rings for Skinner Express w/ Scope Mount on H009

Post by galen.turner » Wed Feb 06, 2019 11:43 pm

Does anyone have experience with the Skinner Express Sight w/ Scope Mount on an H009 .30-30? Specifically curious about which rings you used and impact of recoil on the set up.

I'm considering this set up for myself and would like to use the Warne 7.3 rings Andy recommends on the page (I like their look over the Talley…also cost), however it looks like Warne discontinued manufacturing these with a recoil lug (photo attached).

I did come across these newer QD Warne Rings that have a recoil key (photo attached), but they are only listed in 30mm. I'm using a Leupold VX-Freedom 1.5-4x20 so I'd need to use a ring reducer with them. Does anyone know if the recoil key on these rings will work with the Skinner base? They seem like they would fit, but I'm new to scope mounts/rings so not sure myself. Also, has anyone use ring reducers on a 30 caliber before? Any issues or things to watch out for?

Skinner does mention a "recoil stop screw" that they supply for use with the Talley Rings. Would this work for the new Warne 7.3 rings that do not have the integrated recoil lug?

Thanks in advance!!
Attachments
Skinner Express w/ Scope Mount – recoil slot outlined
Skinner Express w/ Scope Mount – recoil slot outlined
Henry_SM_Express_B.jpg (139.77 KiB) Viewed 2570 times
Alternative QD rings…would this recoil key work with Skinner base?
Alternative QD rings…would this recoil key work with Skinner base?
Warne 314LM QD Rings.jpg (80.09 KiB) Viewed 2591 times
Discontinued Warne 7.3/22 rings with recoil lug
Discontinued Warne 7.3/22 rings with recoil lug
Warne 7.3-22 Rings.jpg (16.91 KiB) Viewed 2591 times
Last edited by galen.turner on Thu Feb 07, 2019 9:49 am, edited 2 times in total.
0 x

User avatar
PT7
Drover
Posts: 4889
Joined: Mon Mar 21, 2016 8:32 am
Location: The Show-Me State
United States of America

Re: Rings for Skinner Express w/ Scope Mount on H009

Post by PT7 » Wed Feb 06, 2019 11:53 pm

KCMO.jpg
KCMO.jpg (27.21 KiB) Viewed 2586 times
Welcome to the Forum from the Show-Me-State, Galen.turner.
Enjoy that Henry .30-30 --- great caliber!
PT7
0 x

~Пока~

User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 19269
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: Rings for Skinner Express w/ Scope Mount on H009

Post by JEBar » Thu Feb 07, 2019 12:25 am

first, welcome to our forum, happy to have you join us .... an ever growing number of our folks use Skinner products, I'm sure some of them will be able to offer assistance with your questions .... I'm looking forward to you continued reports as you equip and have time to really get to know your Henry .... please take a look at our How Many ? thread (link below) and add your 30-30 to our community's total


http://henryrifleforums.com/viewtopic.p ... 832#p83832
0 x

User avatar
Mags
Ranch Foreman
Posts: 6883
Joined: Fri Apr 13, 2018 9:40 pm
Location: Tualatin Valley Oregon
United States of America

Re: Rings for Skinner Express w/ Scope Mount on H009

Post by Mags » Thu Feb 07, 2019 12:47 am

Welcome from the TV Oregon!
0 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234

User avatar
ESquared
Deputy Administrator
Posts: 2911
Joined: Fri Dec 30, 2016 9:00 pm
Location: KC Area
United States of America

Re: Rings for Skinner Express w/ Scope Mount on H009

Post by ESquared » Thu Feb 07, 2019 8:01 am

This is by no means an answer, but my suggestion would be to call Skinner directly. I had an issue within the past week, and I called the number on their site, got "Rob," and he had me figured out within minutes.

Their "tech support" is pretty good.
0 x
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357

galen.turner
Tenderfoot
Posts: 4
Joined: Tue Feb 05, 2019 10:56 am
United States of America

Re: Rings for Skinner Express w/ Scope Mount on H009

Post by galen.turner » Thu Feb 07, 2019 9:27 am

Thanks @ESquared. I sent Skinner an email with this question and got a reply back from Rob the same day! His comments on the Warne rings were the same as their website and didn't have recommendations on any other rings besides the Talleys. Hoping someone here has some insight. Also reaching out to Warne directly about the recoil lugs on their rings and will report back what they say.
0 x

User avatar
ESquared
Deputy Administrator
Posts: 2911
Joined: Fri Dec 30, 2016 9:00 pm
Location: KC Area
United States of America

Re: Rings for Skinner Express w/ Scope Mount on H009

Post by ESquared » Thu Feb 07, 2019 9:33 am

Welcome to the Forum, by the way!

I found Warne's C/S and Tech Support to be great, as well. I think his name was Sean. Very helpful. Please keep us posted!
0 x
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357

galen.turner
Tenderfoot
Posts: 4
Joined: Tue Feb 05, 2019 10:56 am
United States of America

Re: Rings for Skinner Express w/ Scope Mount on H009

Post by galen.turner » Thu Feb 07, 2019 1:02 pm

Reply from Warne Support…
I do appreciate you reaching out to us. For your particular setup, which is awesome by the way, I will just cut right to the chase and say, Talley is handling that arena these days. They are great rings and I have no issue suggesting them to you. It is true I only make the 314 in a 30mm tube version and I do not suggest running any kind of spacers or fillers in rings. As much as I hate to turn away business, Talley is where you need to look for a rock solid setup for your application. They even have the QD version you would like to have.
I'll look at Talley rings in more detail, however from my initial searching it did not appear that they have recoil lugs.
0 x

Post Reply