Spring has sprung. Get out and shoot your Henry

Hunting load

User avatar
Cofisher
Drover
Posts: 2472
Joined: Sat Mar 26, 2016 8:02 pm
Location: Colorado/Nebraska
United States of America

Hunting load

Post by Cofisher » Fri Aug 25, 2017 2:29 pm

Hey folks, I am looking for recommendations on a hunting load. I will be using my 357. I had pretty much settled on the 158 grain XTP Hornady.

I have read some comments on going up to the 180 grain bullet. Is this necessary? Does it make a huge difference in recoil and bang?

I will be using factory loads this season. I hope to start reloading my own this winter.
0 x
Remember, it's not how many guns you have. It's how many bullets you have.

User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 19270
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: Hunting load

Post by JEBar » Sat Aug 26, 2017 2:44 pm

one can certainly go up to 180 gr but we stick with 158 .... to date I've never had a deer or boar fight one off .... can't help with a recommendation for factory loads, we haven't used any since the early 60's .... if power is what you are looking for, those offered by Buffalo Bore https://www.buffalobore.com/index.php?l ... tail&p=102 are a bit high but are about as strong as they come
1 x

User avatar
ditchparrot
Cowhand
Posts: 246
Joined: Fri May 27, 2016 10:32 pm
Location: Humboldt, AZ
United States of America

Re: Hunting load

Post by ditchparrot » Tue Aug 29, 2017 11:14 pm

I bagged a good pig in Florida in May with the 180-grain Buffalo Bore and would highly recommend it. Recoil and noise are considerably more than the standard 158-grain, but nowhere near intolerable for hunting purposes, IMO.
2 x
Henry Big Boy Rifle .357
Henry Classic .22
Henry Lever-Action .410
Henry Big Boy Revolver .357

User avatar
Cofisher
Drover
Posts: 2472
Joined: Sat Mar 26, 2016 8:02 pm
Location: Colorado/Nebraska
United States of America

Re: Hunting load

Post by Cofisher » Tue Aug 29, 2017 11:53 pm

Thank you both for the help. After reading up on Buffalo Bore ammo, I think their 158 grain would do the job just fine. It would appear to come up with approximately 2000 FPS, quite a significant load. Also, the bullet appears to be the Hornady XTP, or a clone of it. I will have some soon and post the results.
0 x
Remember, it's not how many guns you have. It's how many bullets you have.

User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 19270
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: Hunting load

Post by JEBar » Wed Aug 30, 2017 5:01 am

looking forward to hearing your assessment
0 x

User avatar
North Country Gal
Firearms Advisor
Posts: 6054
Joined: Thu Apr 07, 2016 12:46 pm
Location: northern Wisconsin
United States of America

Re: Hunting load

Post by North Country Gal » Wed Aug 30, 2017 10:37 am

I agree on the Buffalo Bore 180s as far as more recoil. It's definitely there, especially in revolvers. It's what I use for protection against bears, up here, on the very few occasions when I feel the need to carry. They also print considerably higher than standard 158s.
2 x

Mgderf
Cowhand
Posts: 431
Joined: Sat Jan 21, 2017 9:37 pm
United States of America

Re: Hunting load

Post by Mgderf » Wed Aug 30, 2017 7:25 pm

I've had excellent results with the Hornady LEVERevolution 140gr with the FTX tip.
Designed for use in lever guns, but work well in most platforms.
1 x

User avatar
Ojaileveraction
Cowboy
Posts: 1292
Joined: Tue Apr 04, 2017 11:49 pm
United States of America

Re: Hunting load

Post by Ojaileveraction » Wed Aug 30, 2017 7:48 pm

I really like Terminal Balistics Research for their in depth analysis. They go into some detail about Hornady FTX and XTP bullets and .357s.
http://www.ballisticstudies.com/Knowled ... agnum.html

If I didn't live in California, My personal choice for a hunting round for 357 mag would be something built around a 158 Sierra Sports Master Soft point.
2 x
Pax at Justitia

jbmabrey
Tenderfoot
Posts: 3
Joined: Sun Apr 29, 2018 4:21 am
United States of America

Re: Hunting load

Post by jbmabrey » Wed Sep 26, 2018 6:01 am

When you start reloading look into Hawk bullets. http://hawkbullets.com/
I agree with Ojaileveraction--
Terminal Ballistics Research is excellent advice. Actually just about the best advice I have read on here.
I own several of his books and have used his website to increase my general knowledge for handloading and shooting. When you look at his website his "in depth analysis" is based on real world holes in animals in hunting situations.
1 x

User avatar
Mistered
Drover
Posts: 3372
Joined: Thu Jun 30, 2016 9:32 pm
Location: Wickiup Junction, OR
United States of America

Re: Hunting load

Post by Mistered » Wed Sep 26, 2018 9:26 am

If I didn't live in California, My personal choice for a hunting round for 357 mag
Can't hunt with .357 in CA?
0 x

Post Reply