- IMG_20191231_120126876_BURST006.jpg (143.3 KiB) Viewed 1679 times
- IMG_20191231_120228742.jpg (128.87 KiB) Viewed 1679 times
- IMG_20191231_124534930.jpg (196.63 KiB) Viewed 1679 times
- 1577814799831189976036115573509.jpg (176.15 KiB) Viewed 1679 times
I will report on the effectiveness of this setup. It will be a while as I don't have all the essential pieces yet. I have been getting what I can when I have a few extra $'s. Having to stay within a budget can be a drag.
understood .... all too well understood .... I believe you will be well served by coming up with a way to mount your powder measure to your board .... while you have time, it would be well worth the time and effort to determine how/where to mount it so that it will lend itself to working smoothly with your press
I thought about getting a piece of 2x4 and clamp the measure to it then it can be clamped to the work bench. I also looked at a stand that can be clamped to the table. I also need a shelving unit for organizing everything else.JEBar wrote: ↑Tue Dec 31, 2019 11:43 pmunderstood .... all too well understood .... I believe you will be well served by coming up with a way to mount your powder measure to your board .... while you have time, it would be well worth the time and effort to determine how/where to mount it so that it will lend itself to working smoothly with your press
excellent ideas .... looking forward to following your progress in putting it all together