Page 2 of 3

Re: 30-30 powders

Posted: Sun Dec 03, 2017 9:52 am
by JEBar
referring back to this thread ===> http://henryrifleforums.com/viewtopic.p ... +silvertip <=== subsequent trips to the range since that mentioned in the above thread have confirmed that 35 gr W748 pushing a 150 gr Nosler Ballistic Silvertip is the most accurate round ever fired from our Winchester Model 94 that was made in 1941 .... with the factory ammo available back in the '50's and '60's the general consensus among the bear hunters I knew was the 94 served best as a reliable short range (50 yards or less), compact, easy to carry rifle .... it was pretty much accepted that at 100 yards, groups the size of a basketball were then norm .... as one who really liked lever action rifles, that was the main reason my first big game was a 308 Browning BLR .... as noted, with our 94, open sights shooting from a bench rest, I can now hit skeet placed in a bank at 100 yards .... for me, that is indeed revolutionary .... I feel pretty sure that this level of accuracy could be attained with a different powder but I'm sold on the importance of the 30-30 Nosler Ballistic Silvertip

Re: 30-30 powders

Posted: Sun Dec 03, 2017 1:55 pm
by Mistered
Yea - why are SOME powders banned and not others? However ditto on the aforementioned load with Unique. 10 Grains sounds good with a 165 grain or heavier bullet. I am using 12 grains with the 100 grain Speer Plinker or the 110 grain Varminter bullet and both are very accurate, and pleasant to shoot.

Re: 30-30 powders

Posted: Sat Dec 09, 2017 11:32 am
by Twotone
Hi All
The EU has declared that some of the chemicals used are carcinogenic. It appears from what the local stores are saying that from next June most of the Hodgdon range will be banned, some of the Alliant ones and a few others but more will follow. Most shops are just selling off their stock now and not re ordering so it is getting hard to find stuff.
I have been playing with the IMR4198 and 173 gn bullet in the 94 and finally getting some decent groups but now I am getting low and and That powder seems unavailable.
Will work on some 2400 I think, I do have Varget but that is on the list too so not much point in developing a load with that.

Re: 30-30 powders

Posted: Tue Jan 02, 2018 4:21 pm
by Twotone
Soory Tarbe, missed this. The banning of a lot of the powders has to do with the European REACH regulations. It concerns carcinogenic chemicals within the powders. It would appear to affect Hodgdon mainly and aome of the IMR powders.

Re: 30-30 powders

Posted: Tue Jan 02, 2018 5:30 pm
by Mistered
Will work on some 2400 I think,
Because 2400 is a magnum handgun powder you may not find any data for it’s use in 30-30 in modern manuals or on the company website. This is most likely due to the very real possibility of double - or close to triple charges in some rifle cases. You might find some ‘alternative’ data for reduced loads on some websites from dedicated ‘experimenters’ but unless you already have some experience in this area I would be very careful. My Lyman manual # 44 from 1967 shows a few loads with 2400. Pm me and I can scan the data and send it to you if you would like.

Re: 30-30 powders

Posted: Sun Jan 14, 2018 7:45 am
by Pitchman1968
Are Accurate powders and Hornady bullets available to you? If so, you might want to try 26 grs. of Accurate 2520 and Hornady's 180 gr. Interlock RN jacketed bullet. This is a hunting round....velocity - circa 1900 fps. I use this load in my Savage Model 99 in .303 Savage. I found this load in one of Richard Lee's early editions of Modern Reloading. Lee contends the .30-30 Winchester and the .303 Savage are nearly identical cartridges and recommends that .30-30 reloading recipes are fine for .303 Savage if the powder weight is reduced by 10%. I can attest that my .303 Savage load is fine for deer out to 150 yards.

Re: 30-30 powders

Posted: Wed Nov 14, 2018 12:18 pm
by steider
I think Ramshot Powders is made in Belgium. Really good powder. I get it here in the USA through Western Powders.

Re: 30-30 powders

Posted: Wed Dec 05, 2018 11:06 pm
by MJ151
I would Google Paco Kelly. He has some great articles on the 30-30 and different loads from light to rocks and dynamite. Beside those articles he's fun to read. Here is a link to several articles that you might find d interesting. http://www.leverguns.com/articles/Default.htm

Re: 30-30 powders

Posted: Thu Dec 06, 2018 7:46 am
by Shawlerbrook
Yes, imr 3031 was the go to for years. I would think 4064 would also work.

Re: 30-30 powders

Posted: Wed Dec 12, 2018 9:54 am
by Blackdog
Ojaileveraction wrote:I did some exploring of low pressure loads recently. Unique is not position sensitive so wadding was not needed. with a 170 grain cast lead bullet 10 grains may be close to a max load for that fast powder.
Biggest issue for me is the possibility of a catastrophic double charge.
Theoretical velocity for 10 grains is 1400-1500fps. A pretty good plinking round

Sorry, but I have to disagree about Unique bring position sensitive. 10r is so little powder that you'll need to elevate the barrel to get it ll down to the primer. Or, use wadding. AND, you still run the risk of a double charge - and 20gr of unique is a dangerous load. Theoretically a dangerous load.

I'd suggest 26.5gr of 3031 or 30gr Varget. Can't double charge with these loads.

M