Spring has sprung. Get out and shoot your Henry
.327 Federal Magnum Rifle Loads
.327 Federal Magnum Rifle Loads
I have one of the new rifles on order, and have all of the reloading components ready to go. I have pages of pistol load data, but to my knowledge, there is no source for published rifle load data in this caliber. The obvious starting place is the pistol load data, but I was wondering if anyone has been thinking about loads for the rifle in this caliber.
Thanks,
GTS
Thanks,
GTS
2 x
Often wrong, but never in doubt!
- CT_Shooter
- Administrator emeritus
- Posts: 5156
- Joined: Mon Mar 21, 2016 8:42 am
- Location: Connecticut
Re: .327 Federal Magnum Rifle Loads
Welcome to the forum from CT, GTS. I'm glad you joined our conversation. I look forward to learning more in this thread.
1 x
H006M Big Boy Brass .357 - H001 Classic .22LR - Uberti / Taylors & Co. SmokeWagon .357 5.5" - Uberti / Taylors & Co. RanchHand .22LR 5.5"
Re: .327 Federal Magnum Rifle Loads
I would think about trying for a little slower powder for rifle loads. I don't know if you could get enough 2400 into the case and with a magnum primer or maybe just have to stick with something like unique and count on the longer barrel to give more velocity.
0 x
Re: .327 Federal Magnum Rifle Loads
While I was pondering my original question last night, I recalled that I had developed loads for a Marlin 1894 Cowboy in .32 H&R Mag some years ago. I think that between that data and published data for pistol loads, I should be able to make a good start on rifle loads for the .327 Fed Mag.
3 x
Often wrong, but never in doubt!
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19337
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: .327 Federal Magnum Rifle Loads
I have no interest in the 327 Federal Mag but am intrigued in watching its development .... I did a bit of research and came up with the link below :
http://reloadammo.com/327fed-mag.htm
the second post in this link : http://www.reloadersnest.com/forum/topi ... C_ID=15889
I can't guarantee any of the data given .... hope this helps
http://reloadammo.com/327fed-mag.htm
the second post in this link : http://www.reloadersnest.com/forum/topi ... C_ID=15889
I can't guarantee any of the data given .... hope this helps
2 x
Re: .327 Federal Magnum Rifle Loads
JEBar,
Thanks for the info. I think I had come across those previously, but it never hurts to have a little more. The trouble that I am running into is that all of the available load data is for revolvers since no one has produced a rifle in this caliber until Henry took on the project. I am beginning to think it may be Henry's version of Bigfoot, often heard about, but seldom seen! Just kidding, I know rolling out a new caliber must be difficult. I just need to be patient.
GTS
Thanks for the info. I think I had come across those previously, but it never hurts to have a little more. The trouble that I am running into is that all of the available load data is for revolvers since no one has produced a rifle in this caliber until Henry took on the project. I am beginning to think it may be Henry's version of Bigfoot, often heard about, but seldom seen! Just kidding, I know rolling out a new caliber must be difficult. I just need to be patient.
GTS
0 x
Often wrong, but never in doubt!
Re: .327 Federal Magnum Rifle Loads
Just don't use Federal brass. Lots of reports of cracked Federal brass even shooting factory Federal ammo.
1 x
Re: .327 Federal Magnum Rifle Loads
Already have Starline brass, 4 or 5 different bullets, primers and powder. Just waiting on my rifle.
0 x
Often wrong, but never in doubt!
- Shakey Jake
- Drover
- Posts: 4331
- Joined: Wed Aug 16, 2017 11:10 am
- Location: Sugar Land, TX
- Contact:
Re: .327 Federal Magnum Rifle Loads
I'm reloading with Star Line brass, Federal Small Magnum Pistol primers, and Power Pistol for my .327 LCR Ruger. I've looked for rifle loads as well but none published yet. I may try some Lil' Gun in some loads after I get through running what I have loaded now to see the difference.
0 x
Re: .327 Federal Magnum Rifle Loads
I tried 4 different loads in my new .327 Henry.
I was not shooting for accuracy at the time, yet still got good groups with all 4 loads.
I used 100gr Hornady XTP pills over a medium load of CFE. Loud, but clean burning and consistent.
Next was 100gr Rainier plated hollow points over a medium load of Titegroup. Not quite the punch of the CFE rounds, but acceptable groups.
Then tried some 90gr powder coated RNFP cast boolits that a friend cast and coated for me. These got a medium charge of 700X.
Noticeably less report and recoil. A little dirtier, but not bad at all. Decent groups.
Last of my hand loads tried were 115gr Meister RNFP cast boolits over a mid-charge of Trailboss. These were downright fun to shoot. Powder-puff report and recoil was nonexistent. It was like shooting a long cap gun, but I still got tight groups.
The dirtiest ammo I've put through it to date has been the Federal American Eagle 100gr JFP.
Those cases came out sooty. Not one of my loads did.
I really like this new rifle. This will be perfect for teaching recoil shy shooters.
All loads used new Star-Line brass and Federal 100 small pistol primers.
I was not shooting for accuracy at the time, yet still got good groups with all 4 loads.
I used 100gr Hornady XTP pills over a medium load of CFE. Loud, but clean burning and consistent.
Next was 100gr Rainier plated hollow points over a medium load of Titegroup. Not quite the punch of the CFE rounds, but acceptable groups.
Then tried some 90gr powder coated RNFP cast boolits that a friend cast and coated for me. These got a medium charge of 700X.
Noticeably less report and recoil. A little dirtier, but not bad at all. Decent groups.
Last of my hand loads tried were 115gr Meister RNFP cast boolits over a mid-charge of Trailboss. These were downright fun to shoot. Powder-puff report and recoil was nonexistent. It was like shooting a long cap gun, but I still got tight groups.
The dirtiest ammo I've put through it to date has been the Federal American Eagle 100gr JFP.
Those cases came out sooty. Not one of my loads did.
I really like this new rifle. This will be perfect for teaching recoil shy shooters.
All loads used new Star-Line brass and Federal 100 small pistol primers.
2 x