Spring has sprung. Get out and shoot your Henry

New to me Blackhawk

User avatar
TMB
Cowhand
Posts: 390
Joined: Fri Jul 27, 2018 5:55 am
Location: South Central NC
United States of America

Re: New to me Blackhawk

Post by TMB » Thu Dec 26, 2019 6:20 pm

I sent an inquiry to Ruger abt a new cylinder in .45 acp. They responded that I can get one factory fit to the gun. Will cost aprox $175. I hope to get one but will have to wait for a while.
2 x
Henry H004ES Golden Boy Eagle Scout Tribute
Henry H004 Golden Boy .22 cal
Henry H006C Big Boy Classic .45 Colt

"If people don't occasionally walk away from you shaking their heads, you're doing something wrong.” ... John Gierach

User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 19349
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: New to me Blackhawk

Post by JEBar » Thu Dec 26, 2019 6:27 pm

good to know that a factory retrofit is available
0 x

Spade5
Tenderfoot
Posts: 12
Joined: Tue Nov 26, 2019 6:59 am
United States of America

Re: New to me Blackhawk

Post by Spade5 » Fri Dec 27, 2019 8:16 am

I have one in 44 mag. that I bought in the 70's. Heavy but very accurate. I had to change the grips. The stock ones just did not fit my hand. Enjoy.
0 x

Top Dog
Tenderfoot
Posts: 35
Joined: Tue Nov 12, 2019 11:21 am
United States of America

Re: New to me Blackhawk

Post by Top Dog » Sat Dec 28, 2019 9:40 am

I have heard that the 9mm conversion was not as accurate as the 357. Probably due to difference in bore size.

I see you are from Wisconsin. Anywhere near Elkhorn?? Am interested in The Beast From Bray Road. Sounds like something I would like to check out.

Top Dog
0 x

User avatar
North Country Gal
Firearms Advisor
Posts: 6094
Joined: Thu Apr 07, 2016 12:46 pm
Location: northern Wisconsin
United States of America

Re: New to me Blackhawk

Post by North Country Gal » Sat Dec 28, 2019 10:27 am

Nope. That's way to the south in the tropical part of the state. I'm way north, just a bit north of Rhinelander. We have our own demon of the woods, up here, the ferocious Hodag. it would eat that Beast for a snack. :)

Image

The native Ojibwe, up here, have their own evil spirit of the woods in the windigo. When you hear the windigo calling your name, get your affairs in order. Your days are numbered.
1 x

User avatar
BigAl52
Forum Ambassador
Posts: 13715
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: New to me Blackhawk

Post by BigAl52 » Sat Dec 28, 2019 1:00 pm

TMB wrote:
Thu Dec 26, 2019 6:20 pm
I sent an inquiry to Ruger abt a new cylinder in .45 acp. They responded that I can get one factory fit to the gun. Will cost aprox $175. I hope to get one but will have to wait for a while.
I bought a Bisley that came with one. The ACP cylinder is fun to shoot in that gun. Its also very accurate especially with some of the 200 gr swc bullets. No recoil at all
1 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

User avatar
Mags
Ranch Foreman
Posts: 6908
Joined: Fri Apr 13, 2018 9:40 pm
Location: Tualatin Valley Oregon
United States of America

Re: New to me Blackhawk

Post by Mags » Sun Dec 29, 2019 12:47 pm

.
Check VTI gun parts. I bought a .45 ACP cylinder for my Uberti for about $120. Timing and alignment were good right out of the box. Only needed to shave down the bushing a bit. VTI has great persoanlized customer service too!
TMB wrote:
Thu Dec 26, 2019 6:20 pm
I sent an inquiry to Ruger abt a new cylinder in .45 acp. They responded that I can get one factory fit to the gun. Will cost aprox $175. I hope to get one but will have to wait for a while.
0 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234

User avatar
TMB
Cowhand
Posts: 390
Joined: Fri Jul 27, 2018 5:55 am
Location: South Central NC
United States of America

Re: New to me Blackhawk

Post by TMB » Sun Dec 29, 2019 12:54 pm

Mags wrote:
Sun Dec 29, 2019 12:47 pm
.
Check VTI gun parts. I bought a .45 ACP cylinder for my Uberti for about $120. Timing and alignment were good right out of the box. Only needed to shave down the bushing a bit. VTI has great persoanlized customer service too!
I'll definitely check into that. Thanks!

Edit: I checked their website and they don't list Ruger parts.
0 x
Henry H004ES Golden Boy Eagle Scout Tribute
Henry H004 Golden Boy .22 cal
Henry H006C Big Boy Classic .45 Colt

"If people don't occasionally walk away from you shaking their heads, you're doing something wrong.” ... John Gierach

User avatar
Mags
Ranch Foreman
Posts: 6908
Joined: Fri Apr 13, 2018 9:40 pm
Location: Tualatin Valley Oregon
United States of America

Re: New to me Blackhawk

Post by Mags » Sun Dec 29, 2019 9:09 pm

.
Might drop them an email and see if one of the cylinders they have for the brands they list would still fit a Ruger. mail@vtigunparts.com
They were fast and helpful at responding to my questions.
TMB wrote:
Sun Dec 29, 2019 12:54 pm

I'll definitely check into that. Thanks!

Edit: I checked their website and they don't list Ruger parts.
1 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234

Top Dog
Tenderfoot
Posts: 35
Joined: Tue Nov 12, 2019 11:21 am
United States of America

Re: New to me Blackhawk

Post by Top Dog » Mon Dec 30, 2019 9:14 am

North Country Gal,

Looks like that Hodag would be an interesting creature to deal with!!!
I did not know that WI had a tropical section. But then again,what do I know. You probably have snow on the 4th of July!!!

Up at the cabin in Jackman ,ME last Sept 1st,I was getting sleet!!!

Top Dog
0 x

Post Reply