Spring has sprung. Get out and shoot your Henry

Range session with the Miroku Winchester M73 in 44-40

Post Reply
User avatar
Mgr2
Wrangler
Posts: 83
Joined: Tue Sep 06, 2016 1:35 pm
Norway

Range session with the Miroku Winchester M73 in 44-40

Post by Mgr2 » Wed Oct 16, 2019 5:54 am

Hi all.

Not a Henry, but a close relative :). Here is a short video I made of my recent session at the short range.

https://youtu.be/LR8C5hbsQj4
1 x
Henry Big Boy Steel .357 mag

User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 19268
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: Range session with the Miroku Winchester M73 in 44-40

Post by JEBar » Wed Oct 16, 2019 7:49 am

thanks for the link to the video .... I'd like to hear more of your use impressions of the caliber and rifle
0 x

User avatar
Mistered
Drover
Posts: 3372
Joined: Thu Jun 30, 2016 9:32 pm
Location: Wickiup Junction, OR
United States of America

Re: Range session with the Miroku Winchester M73 in 44-40

Post by Mistered » Wed Oct 16, 2019 9:52 am

Not a Henry, but a close relative
More like the distinguished great grandfather!
I had the opportunity to shoot an original 1873 many years ago.
Still kicking around the idea of one in .357.
0 x

User avatar
Mags
Ranch Foreman
Posts: 6883
Joined: Fri Apr 13, 2018 9:40 pm
Location: Tualatin Valley Oregon
United States of America

Re: Range session with the Miroku Winchester M73 in 44-40

Post by Mags » Wed Oct 16, 2019 12:20 pm

.
side gate loading looks really slick and easy on that one.
Last edited by Mags on Wed Oct 16, 2019 10:42 pm, edited 1 time in total.
0 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234

User avatar
BigAl52
Forum Ambassador
Posts: 13637
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: Range session with the Miroku Winchester M73 in 44-40

Post by BigAl52 » Wed Oct 16, 2019 10:32 pm

Had one great caliber especially when loaded with black powder. Should of never sold it and I would buy it back tomorrow if I could
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

User avatar
Mgr2
Wrangler
Posts: 83
Joined: Tue Sep 06, 2016 1:35 pm
Norway

Re: Range session with the Miroku Winchester M73 in 44-40

Post by Mgr2 » Thu Oct 17, 2019 2:43 am

JEBar wrote:
Wed Oct 16, 2019 7:49 am
thanks for the link to the video .... I'd like to hear more of your use impressions of the caliber and rifle
The Miroku Winchester 73 is superbly built. Wood is very good, and I like the fact that it is oiled and not lacquered. Wood to steel finish is perfect, bluing is deep and glossy, and moving parts cycle easily and have no play. All in all a perfect rifle for the price range.

Before I bought it I read that the 44-40 WCF is a challenging caliber to reload, so I knew what I was going into, and have not been diappointed in that matter :) . It is easy to crumple the cases if the expander plug is too small, or if there is too much lube on the bullets. However with the right tools and care during bullet seating this is not a problem. So far I have only shot it at shorter ranges (50-100 meters) however look forward to experiment with loads and bullets at longer ranges (150-300 meters).

Here is some interesting info about the history and development of the 44 WCF cartridge, and information about black powder and smokeless loads: https://sites.google.com/view/44winches ... idges/home
0 x
Henry Big Boy Steel .357 mag

User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 19268
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: Range session with the Miroku Winchester M73 in 44-40

Post by JEBar » Thu Oct 17, 2019 8:40 am

info appreciated, specially about reloading .... looking forward to your ongoing reports
1 x

User avatar
BigAl52
Forum Ambassador
Posts: 13637
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: Range session with the Miroku Winchester M73 in 44-40

Post by BigAl52 » Thu Oct 17, 2019 11:03 am

I found loading for it not that bad at all as you have. I played with black in it and used an RCBS bullet that was 215 grain out of one of there moulds. It was a very accurate bullet and would shoot one ragged hole with a case full of BP. I got that info from a book written by Mike Venturino called Shooting Leverguns of the Old West. It was a great book as he gave info on shooting all of the old west calibers with black and smokeless. That 44-40 will shoot great at distances you are planning to shoot it at. I used an 1873 Uberti with a 24 inch barrel and a close friend had one in a 30 inch barrel. He later sold it to me and then I sold it and shouldnt of. I do now have an 1873 Uberti in 357 18 inch trapper model. Its a great gun to shoot.
1 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

User avatar
Mags
Ranch Foreman
Posts: 6883
Joined: Fri Apr 13, 2018 9:40 pm
Location: Tualatin Valley Oregon
United States of America

Re: Range session with the Miroku Winchester M73 in 44-40

Post by Mags » Thu Oct 17, 2019 12:00 pm

.
Enjoyed reading the history. Thanks for pointing it out!
Mgr2 wrote:
Thu Oct 17, 2019 2:43 am
...
Here is some interesting info about the history and development of the 44 WCF cartridge, and information about black powder and smokeless loads: https://sites.google.com/view/44winches ... idges/home
1 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234

Post Reply