Get out and shoot during the good weather then come back here and share it with us

Henrys Original

A modern classic
User avatar
Mags
Drover
Posts: 3581
Joined: Fri Apr 13, 2018 9:40 pm
Location: Tualatin Valley Oregon
United States of America

Re: Henrys Original

Post by Mags » Tue May 14, 2019 10:28 pm

... and it looks like Dina in HenryCS shut that down.
1 x
:idea: Lever Action H009B .30-30 | Long Ranger H014s .223/5.56 | Uberti Colt .45 Revolver
"How Many" #596 & #895
Wish List: ???

User avatar
BigAl52
Deputy Marshal
Posts: 3614
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: Henrys Original

Post by BigAl52 » Tue May 14, 2019 10:45 pm

Ya the guy dont have anything else to say I know hes been on there and seen it.
0 x
Young guys should hang out with old guys cause old guys know something

SGC .22LR .22MAG
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBBC .45 COLT
CCH 45-70
AW 45-70
BBS .41 MAG
BBB .357
CCHC .357
SS .357
SIDE GATE 38-55

Travlin
Cattle Driver
Posts: 568
Joined: Mon Mar 21, 2016 1:06 am

Re: Henrys Original

Post by Travlin » Fri May 17, 2019 10:45 pm

Guns Of The Old West Summer 2018 issue. There is a photo of the original 1860 Henry Rifle serial # 8261 that was disassembled to reverse -engineer the tooling for the H.R.A. model of that rifle. The only notable change was a slight lengthening of the action to use the centerfire cartridge.
0 x

dddrees
Cattle Driver
Posts: 575
Joined: Sun Jun 26, 2016 5:55 pm
United States of America

Re: Henrys Original

Post by dddrees » Tue May 28, 2019 11:19 am

Just another little tid bit for those that might be interested. I find it interesting that the Winchester Yellow Boy or 1866 I received back from Winchester last week that had been polished has already started to get a patina and the New Original Henry that I got more than a couple of months ago is still as shiny as the day I got it. I don't know how the brass alloy is on a Uberti but there certainly seems to be something different about the brass alloy that Henry uses.
Last edited by dddrees on Tue May 28, 2019 1:39 pm, edited 1 time in total.
0 x

User avatar
Mistered
Drover
Posts: 2100
Joined: Thu Jun 30, 2016 9:32 pm
Location: Wickiup Junction, OR
United States of America

Re: Henrys Original

Post by Mistered » Tue May 28, 2019 1:33 pm

I don't know how the brass alloy is on a Uberti but there certainly seems to be something different about the brass allow that Henry uses.
I found the following on another site with regard to Henry brass frame question:

The brass receiver is probably cast from a brass alloy similar to "ships brass" which is 70% copper and 30% zinc. The copper gives it the goldish color. Compare to softer "cartridge brass" which is 60/40 Cu/Zn. So I'd call both a copper alloy since greatest percent in the alloy. The density of iron(cold steel) is about 7.9 compared to the density of copper 9.0 and Zn 7.1 so if weight of the brass model is higher then there has to be high amount of copper in the alloy if it was more zinc it would actually be lighter than steel.
0 x

dddrees
Cattle Driver
Posts: 575
Joined: Sun Jun 26, 2016 5:55 pm
United States of America

Re: Henrys Original

Post by dddrees » Tue May 28, 2019 1:41 pm

Mistered wrote:
Tue May 28, 2019 1:33 pm
I don't know how the brass alloy is on a Uberti but there certainly seems to be something different about the brass allow that Henry uses.
I found the following on another site with regard to Henry brass frame question:

The brass receiver is probably cast from a brass alloy similar to "ships brass" which is 70% copper and 30% zinc. The copper gives it the goldish color. Compare to softer "cartridge brass" which is 60/40 Cu/Zn. So I'd call both a copper alloy since greatest percent in the alloy. The density of iron(cold steel) is about 7.9 compared to the density of copper 9.0 and Zn 7.1 so if weight of the brass model is higher then there has to be high amount of copper in the alloy if it was more zinc it would actually be lighter than steel.

Thanks



It's very easy to wipe or shine the Henry with a soft cloth but with the Winchester 1866 soft cloth alone will not bring back the shine or clean the patina off of the Winchester. Just two diffrent animals entirely.
0 x

User avatar
Mistered
Drover
Posts: 2100
Joined: Thu Jun 30, 2016 9:32 pm
Location: Wickiup Junction, OR
United States of America

Re: Henrys Original

Post by Mistered » Tue May 28, 2019 1:47 pm

I'll gamble on the Henry brass being of a harder composition.
0 x

dddrees
Cattle Driver
Posts: 575
Joined: Sun Jun 26, 2016 5:55 pm
United States of America

Re: Henrys Original

Post by dddrees » Wed May 29, 2019 12:07 am

Mistered wrote:
Tue May 28, 2019 1:47 pm
I'll gamble on the Henry brass being of a harder composition.
Well considering my Winchester Miroku 1866 supports 38s only I would think your right. The Uberti version of the 1866 supports 38 only as well based on what I saw on Taylors website. The Winchester Miroku 1873 on the other hand is 357\38 but then again the reciever is steel and not their brass alloy. This to me is another indication that Uberti is probably not supplying parts to Henry Repeating Arms Co. At least not the brass alloy anyway. Anything is possible but it seems to me if Uberti were able to make a better alloy they might want to also use it themselves.
0 x

Post Reply